GY-NEO6MV2 GPS Module Design

Thought for 54 sec

flux

You want a reusable symbol and schematic for your GY-NEO6MV2 GPS module part.

I’ve prepared a plan to:
1. Confirm the exposed interface
2. Create the symbol representation
3. Connect the schematic terminals logically
4. Add reuse/documentation details
5. Validate the part setup

Click Start on the plan bar to begin. Let me know if you want any requirements changed first.

thinker2507

Use only VCC, GND, TX, and RX for this symbol.

Thought for 41 sec

flux

Your goal is to simplify the GY-NEO6MV2 part to a 4-terminal symbol and schematic.

Plan is ready:
1. Review the current part
2. Keep only VCC, GND, TX, RX
3. Remove or hide everything else
4. Update labels/documentation
5. Validate the part definition

Click Start on the plan bar to apply it. Let me know if you want anything changed first.

Check current terminals

Add 4-pin note

Run review next

necesito hacer un gps que tenga necesite conexion a internet y que me de una ubi...

andyacero

@copilot necesito hacer un gps que tenga necesite conexion a internet y que me de una ubicacion exacta

copilot

Para implementar un GPS con conexión a Internet que proporcione una ubicación exacta, debes considerar agregar un módulo GSM/GPRS a tu proyecto junto con el módulo GPS GY-NEO6MV2 que ya tienes. El módulo GSM/GPRS te permitirá conectarte a Internet y enviar los datos de ubicación obtenidos por el GPS a un servidor o una aplicación móvil.

Aquí tienes una propuesta general de cómo podrías conectar el módulo GPS GY-NEO6MV2 y un módulo GSM/GPRS genérico a un microcontrolador (por ejemplo, Arduino) en tu proyecto. Para este ejemplo, asumiré que estás utilizando un Arduino Uno, pero debes adaptar las conexiones a tu microcontrolador específico si es diferente.

Conexión del Módulo GPS GY-NEO6MV2:
- VCC: Conectar $U:VCC$ a +3.3V en el Arduino.
- GND: Conectar $U:GND$ a GND en el Arduino.
- TX: Conectar $U:TX$ a RX en el Arduino.
- RX: Conectar $U:RX$ a TX en el Arduino.
Nota: Puede ser necesario utilizar un divisor de voltaje o un módulo conversor de niveles lógicos entre los pines TX/RX del GPS y el Arduino si tu microcontrolador solo maneja 5V y el GPS 3.3V para evitar dañar el módulo GPS.
Conexión de un Módulo GSM/GPRS (Ejemplo con SIM800L):
- VCC: Conectar a 4V (utiliza un regulador de voltaje si es necesario).
- GND: Conectar a GND en el Arduino.
- TX: Conectar a RX (Digital Pin) en el Arduino.
- RX: Conectar a TX (Digital Pin) en el Arduino.
Nota: Asegúrate de que el módulo SIM800L esté alimentado adecuadamente, ya que puede requerir hasta 2A durante las transmisiones. Un regulador de voltaje adecuado y una fuente de alimentación suficientemente robusta son cruciales.
Software:
- Utiliza la biblioteca TinyGPS++ para Arduino para procesar los datos recibidos del GPS.
- Usa la biblioteca correspondiente a tu módulo GSM/GPRS (por ejemplo, SIM800L.h para el SIM800L) para establecer una conexión a Internet y enviar datos.
- Codifica el Arduino para leer los datos de ubicación del GPS, enviar estos datos a través del módulo GSM/GPRS a un servidor o servicio en línea.
Envío de Datos:
- Define un protocolo o formato para los datos de ubicación (por ejemplo, JSON).
- Configura un servidor o servicio en línea para recibir y procesar/almacenar estos datos.
- Considera utilizar servicios de IoT como ThingSpeak, Google Firebase, o MQTT para facilitar el envío y manejo de datos.

Recuerda revisar las hojas de datos de cada módulo para detalles específicos de conexión y operación. Además, ten en cuenta las regulaciones locales respecto al uso de módulos GSM/GPRS, ya que en algunos lugares podrías necesitar registrarlo o cumplir ciertas normativas.

Espero que esta guía te sea de utilidad para iniciar tu proyecto. Si tienes más preguntas específicas o necesitas aclaraciones, no dudes en preguntar.

Someone is typing...

Love this symbol! Well done @jharwinbarrozo

natarius

Love this symbol! Well done @jharwinbarrozo

Someone is typing...

VCC

GND

Reviews

Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
16.6k
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
jharwinbarrozo
1.2M
875105359001
10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
jharwinbarrozo
1.1M
1070TR
Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
jharwinbarrozo
700.5k
Push Button
A momentary or non-latching switch which causes a temporary change in the state of an electrical circuit only while the switch is physically actuated. SWITCH TACTILE SPST-NO 0.05A 24V
jharwinbarrozo
490.7k
XY301V-A-5.0-3P
Straight 3 pin 5mm 3-pin Pitch 5mm 15A 1.5 300V Screw terminal block 01x03 #screwblock #connector #commonPartsLibrary
jharwinbarrozo
537.9k

Project Name

GY-GPS6MV2 module

Description

GY-NEO6MV2 board features the u-blox NEO-6M GPS module with antenna and built-in EEPROM. This is compatible with various flight controller boards designed to work with a GPS module.

Properties

Part Type

Integrated Circuit

Manufac…er Name

Manufac… Number

GY-NEO6MV2

Datasheet URL

Package …se Code

Designator Prefix

Pricing & Availability

No results found.

Controls

Welcome 👋

Flux accelerates your PCB design with AI.

Create your account to start using this component and bring your ideas to life.

jharwinbarrozo / GY-GPS6MV2 module

Schematic