LF155H CAD Model and Footprint Alignment
Thought for 25 sec
I’ll move the eight pads onto the Ø5.08 mm circle without changing their numbering or the package center, then verify lead alignment and update the verification file.
Thought for 5 mins 50 sec
Thought for 9 sec
1/2 Correct pad-circle positions and update package-model-verification.
Correct pad-circle positions and update package-model-verification.
Independently verify all eight lead alignments and preserved geometry.
Thought for 15 sec
Awaiting 1 task
Thought for 6 sec
Referenced guidance.
"LF155H Pad Circle Correction" completed.
Thought for 2 mins 17 sec
Thought for 10 sec
2/2 Independently verify all eight lead alignments and preserved geometry.
Correct pad-circle positions and update package-model-verification.
Independently verify all eight lead alignments and preserved geometry.
Thought for 10 sec
Awaiting 1 task
"LF155H Footprint Verification" completed.
Thought for 32 sec
Corrected the pad circle to Ø5.08 mm, preserving pin numbering, package center, copper geometry, and drills; the root CAD model remains unchanged. All eight lead centers now align with their pad centers, and orientation and seating checks passed. Updated Package Model Verification with the measurements; manufacturing/DRC qualification remains outside this check.
