Terminal Rename Request
Edit this part project's 16 existing terminals by changing ONLY each terminal's label/name. Preserve every Pin Number, electrical/Terminal Type, footprint mapping, Symbol Pin Position/geometry, order/orientation, and all other properties. Existing inspected physical Pin Numbers are 1..16, while the parent request gave a zero-based mapping 0..15; apply it ordinally (0→existing physical pin 1, 1→pin 2, ... 15→pin 16), because pin numbers must remain unchanged. Exact resulting labels by existing pin number: 1=Ground; 2=VCC; 3=Green; 4=Black; 5=Red; 6=Blue; 7=Ground; 8=Vmot; 9=Enable; 10=MS3; 11=MS2; 12=MS1; 13=Reset; 14=Sleep; 15=Step; 16=Direction. Inspect first, mutate names/designators only, then verify all 16 and report preserved fields or blockers.
Thought for 6 sec
I’ll inspect the 16 terminals, rename only their labels using the specified physical-pin mapping, then verify that pin numbers, types, mappings, geometry, order, orientation, and other properties are unchanged.
Thought for 18 sec
Blocked: the project grants you comment-only access, while terminal renaming requires edit permission. I inspected all 16 terminals and prepared the exact physical-pin mapping, but no mutation occurred, so all pin numbers, terminal types, footprint mappings, geometry, order/orientation, and properties remain unchanged.
Grant edit access or fork the part project, then rerun this request.
Fork and rename
Create editable part
Prepare change note
Inspect footprint mapping
