Capacitor Specifications and Guidance
2:47
Determ.
Managing.
Analy.
Planning.
Accessing knowledge base.
Looking for "Capacitance value and tolerance" in GCM1885C2A151FA16-01.pdf
Looking for "Rated voltage" in GCM1885C2A151FA16-01.pdf
Looking for "Temperature characteristics or dielectric type" in GCM1885C2A151FA16-01.pdf
Looking for "Operating temperature range" in GCM1885C2A151FA16-01.pdf
Looking for "Insulation resistance and test conditions" in GCM1885C2A151FA16-01.pdf
Looking for "Dissipation factor (DF, tan delta) and test frequency" in GCM1885C2A151FA16-01.pdf
Looking for "Aging rate" in GCM1885C2A151FA16-01.pdf
Looking for "Withstand voltage or dielectric strength" in GCM1885C2A151FA16-01.pdf
Looking for "Dimensions (length, width, thickness) for 0603 (1608 metric)" in GCM1885C2A151FA16-01.pdf
Looking for "AEC-Q200 qualification or automotive grade indication" in GCM1885C2A151FA16-01.pdf
Looking for "Soldering recommendations or reflow profile summary" in GCM1885C2A151FA16-01.pdf
Looking for "Derating guidance: rated voltage usage notes or derating versus temperature" in GCM1885C2A151FA16-01.pdf
Looking for "Capacitance change versus DC bias or frequency (if provided)" in GCM1885C2A151FA16-01.pdf
Looking for "Capacitance change versus temperature curve or specification" in GCM1885C2A151FA16-01.pdf
Looking for "Mounting/handling cautions related to mechanical stress or board bending (summary)" in GCM1885C2A151FA16-01.pdf
Looking for "C0G aging characteristic" in GCM1885C2A151FA16-01.pdf
Looking for "Class 1 aging" in GCM1885C2A151FA16-01.pdf
Table
| Parameter | Value |
|---|---|
| Capacitance | 150 pF |
| Tolerance | ±1% |
| Rated voltage | DC 100 V |
| Dielectric / Temp. characteristic | C0G (EIA), 0 ±30 ppm/°C (25 to 125 °C) |
| Operating temperature range | −55 to +125 °C |
| Insulation resistance (IR), 25 °C | ≥ 10,000 MΩ or 500 Ω·F (whichever is smaller) |
| Q / DF measurement conditions | Cap/Q/DF measured at 1.0 ±0.1 MHz, 0.5–5.0 Vrms |
| Q spec (C ≥ 30 pF) | Q ≥ 1000 (at 1 MHz per table conditions) |
| Size (0603 / 1608 metric) | L 1.6 ± 0.1 mm, W 0.8 ± 0.1 mm, T 0.8 ± 0.1 mm |
| Qualification | Datasheet states applicability to “Chip MLCCs for Automotive” and includes “AEC‑Q200 Murata Standard Specification and Test Methods” |
- Operating temperature and self-heating
- “The surface temperature of the capacitor shall not exceed the maximum operating temperature including self-heating.”
- For DC rated voltage products less than 100 VDC: “The load should be contained so that the self-heating of the capacitor body remains below 20°C when measuring at an ambient temperature of 25°C.”
- Practical takeaway: Regardless of rating, verify the part’s surface temperature in your actual AC/pulse/RF conditions and keep it within the −55 to +125 °C operating range (including any self-heating).
- AC/pulse/high-frequency use
- When used with AC or pulse voltages, “check the self-heating condition” as dielectric loss can generate heat. Confirm the capacitor’s surface temperature remains within limits.
- DC-bias and aging notes in the datasheet apply to “high dielectric constant type” capacitors. This part is C0G (Class 1), so the strong DC-bias reduction and aging behavior discussed for Class 2 types (e.g., X7R) are not the concern here. Still measure in-circuit if your environment is extreme.
- Mounting/mechanical stress (board flex crack prevention)
- Minimize board bending near the part; orient chips to reduce stress relative to the panel break direction; keep adequate distance from V-grooves/score lines and screw holes; use support pins during test/probing; avoid excessive solder volume that increases crack risk.
Ready.
Reviews
- Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portaljharwinbarrozo43.0M
- Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #powerjharwinbarrozo11.4M
- A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibraryjharwinbarrozo1.5M
- A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibraryjharwinbarrozo1.5M
- A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibraryjharwinbarrozo15.6k
- An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.Terminal
- 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlinkjharwinbarrozo1.2M
- 10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcanjharwinbarrozo1.2M
- Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlinkjharwinbarrozo1.1M
150pF 0603 Capacitor
Properties
150p
Non-Polarized Capacitor
SMD_0603_1608Metric
GCM1885C2A151FA16D
Murata
C
Pricing & Availability
Distributor | Qty 1 |
|---|
Assets
3DSMD_01005_0402Metric.step
3DSMD_01005_0402MetricSMD_1210_3225Metric.kicad_mod
SMD_1210_3225Metric3DCP_Elec_5x5.4.step
3DCP_Elec_5x5.4SMD_01005_0402Metric.kicad_mod
SMD_01005_0402Metric3DSMD_0805_2012Metric.step
3DSMD_0805_2012MetricCP_Elec_4x5.4.kicad_mod
CP_Elec_4x5.43DSMD_3640_9110Metric.step
3DSMD_3640_9110Metric
non-polarized-cap
non-polarized-capDefault3DSMD_2225_5664Metric.step
3DSMD_2225_5664Metric3DSMD_0402_1005Metric.step
3DSMD_0402_1005MetricSMD_0402_1005Metric.kicad_mod
SMD_0402_1005Metric3DSMD_1210_3225Metric.step
3DSMD_1210_3225MetricSMD_1825_4564Metric.kicad_mod
SMD_1825_4564MetricSMD_0603_1608Metric.kicad_mod
SMD_0603_1608MetricSMD_3640_9110Metric.kicad_mod
SMD_3640_9110Metric3DCP_Elec_4x5.4.step
3DCP_Elec_4x5.4CP_Elec_10x10.kicad_mod
CP_Elec_10x103DSMD_1812_4532Metric.step
3DSMD_1812_4532MetricCP_Elec_6.3x5.4.kicad_mod
CP_Elec_6.3x5.4SMD_0201_0603Metric.kicad_mod
SMD_0201_0603MetricFootprint3DCP_Elec_10x10.step
3DCP_Elec_10x10CP_Elec_6.3x7.7.kicad_mod
CP_Elec_6.3x7.73DCP_Elec_8x10.step
3DCP_Elec_8x103DSMD_1825_4564Metric.step
3DSMD_1825_4564MetricCP_Elec_5x5.4.kicad_mod
CP_Elec_5x5.4SMD_1812_4532Metric.kicad_mod
SMD_1812_4532Metric3DCP_Elec_6.3x7.7.step
3DCP_Elec_6.3x7.7SMD_2225_5664Metric.kicad_mod
SMD_2225_5664Metric3DSMD_0603_1608Metric.step
3DSMD_0603_1608Metric3DSMD_1206_3216Metric.step
3DSMD_1206_3216Metric3DSMD_0201_0603Metric.step
3DSMD_0201_0603Metric
capacitor 0603 (1608)metric.png
capacitor 0603 (1608)metricThumbnailSMD_0805_2012Metric.kicad_mod
SMD_0805_2012MetricSMD_2220_5650Metric.kicad_mod
SMD_2220_5650MetricCP_Elec_8x10.kicad_mod
CP_Elec_8x10SMD_1206_3216Metric.kicad_mod
SMD_1206_3216Metric3DCP_Elec_8x6.2.step
3DCP_Elec_8x6.23DSMD_2220_5650Metric.step
3DSMD_2220_5650Metric
polarized-cap
polarized-cap3DCP_Elec_6.3x5.4.step
3DCP_Elec_6.3x5.4CP_Elec_8x6.2.kicad_mod
CP_Elec_8x6.2Controls
Welcome 👋
Flux accelerates your PCB design with AI.
Create your account to start using this component and bring your ideas to life.