Printing Circuit for Transfer
316 days
How do I print circuit for transfer to panel?
Thought for 46 sec
316 days
I wasn’t able to find any Flux documentation on printing a layout for toner-transfer or panel transfer directly. It looks like Flux doesn’t include a built-in “print for transfer” feature.
You might consider exporting your copper layers as Gerber files (via the Export menu → Gerber), opening them in a Gerber viewer, mirroring the layer, and printing from there.
For more on Flux’s capabilities or to request this feature, you can check:
- Flux Documentation: https://docs.flux.ai/Introduction/the-flux-method
- Search All Docs: https://docs.flux.ai/?s=How%20to%20print%20circuit%20for%20transfer%20to%20panel
- Flux User Community: https://www.flux.ai/p/slack-community
Export Gerber files
Mirror copper layer
Generate printable PDF
Export drill layer
FF1 (OFF or ON) and (OFF or ACC)
how to make the entire circuit bigger on my screen?
can I change the background from black to white?
2y
2y
If you want to enlarge your circuit design on the Flux.ai UI, you can use the Zoom In or Zoom Out buttons on the top of the screen. Alternatively, you can use the scroll wheel on your mouse to zoom in or out.
Another way is by using the "Fit to screen" or "Fit all in view" feature. This option will adjust the zoom and pan automatically so that your entire circuit fits on the screen.
Remember that enlarging the circuit does not change the actual dimensions/sizes of the components, it's just a visual aid to help you work more effectively.
If none of these solutions work for you, please provide more details, and I'll be glad to give additional assistance.
2y
can I change the background from black to white?
2y
Unfortunately, as of the world knowledge cut-off in September 2023, Flux.ai does not support changing the background color of the design area. The design background remains in a dark theme to provide contrast with the component and connection colors which aid in readability of the design.
If you have any issues, or if you feel a lighter background would be beneficial to you, I recommend reaching out to Flux support or looking in the user settings for any updates on this feature delivered after the knowledge cutoff. It's always possible updates have been added after my training data was collected.
2y
6
list all V1 pins in a table format. For each pin provide its pin number, pin nam...
Hello? How to have through hole terminals
2y
How to have through-hole terminals
2y
2y
Certainly, below is the tabular representation for the pins of V1.
Table
| Pin Number | Pin Name | Function |
|---|---|---|
| 1 | ANODE | This is the positive terminal of the component where the conventional current flows into. |
| 2 | CATHODE | This is the negative terminal of the component where the conventional current flows out of. |
2y
How to you create vias for off board souces?
2y
In the context of Flux's electronic CAD software, a via allows electrical connection between different layers of a PCB through a small hole drilled in the board and filled or plated with metal, usually copper. However, if you're looking to connect off-board sources like sensors, buttons, LEDs, etc., you would typically use header connectors or terminal blocks depending on the nature and the number of the connections required.
To create connections for off-board components, follow these steps:
-
Add Header/Terminal block connectors: Depending on the requirement, add a connector to your schematic. This could be single or multiple pin headers, screw terminal blocks etc. These components can be found in Flux's standard library.
-
Wire up the connectors: Now connect the desired circuit elements (like resistors, capacitors, ICs pin) to the respective pins of the connector using wires.
-
Transfer to PCB: After the wiring, transfer your schematic to a PCB layout.
-
Place the connectors: In the PCB layout, place these connectors at suitable and accessible places.
-
Route the traces: Now create traces from the connector to the associated components.
Finally, you would connect your off-board sources to these connectors on the assembled PCB.
Please note that the specific procedures may vary slightly based on the actual design tool interface and the version you are using. Also, remember to verify these steps with your design requirements and constraints.
2y
how to have through hole terminals?
2y
Implementing through-hole terminals in your project involves several steps that assume you have completed your schematic design.
Here are the steps you can follow using the Flux electronics CAD program:
-
Select a Through-hole Connector: Find a suitable through-hole connector in your design tool’s components library. This can be a header, a terminal block, or any other type of connector that matches your needs.
-
Place the Connector on the Schematic: Place the selected connector in the schematic where you want your external connection to be made. This should be placed such that its pins align with the relevant net for the connection you're making.
-
Connect the Connector: Wire the connector to the rest of the circuit as per your design requirements.
-
Move to PCB Layout: Once you’ve completed and validated your schematic, switch over to the PCB layout view.
-
Place the Connector: In the PCB layout, place the connector at the desired location. The tool will automatically generate holes for the selected through-hole connector.
-
Route Connection: Now, you need to route the traces from the connector to the associated components.
-
Check Design Rules: After everything is done, use the DRC (Design Rule Check) to make sure all rules are followed. This will help you catch any issues related to the placement of the through-hole connectors, among other things.
-
Generate Gerber Files: Once you have finalized your design and confirmed it with Design Rule Check, generate your Gerber Files. These files can then be shipped off to your PCB manufacturer. They will understand how to translate the component placements and drill holes into physical objects.
When you receive your completed board from the manufacturer, you will notice that the through-hole connectors have holes going through the board where you can solder your component leads.
Remember that the specific steps could slightly vary depending on the actual design tool interface and the version you're using. Lastly, please verify these steps with your design requirements and constraints. Always consult with your manufacturer for specific requirements they may have related to through-hole terminals, as practices can vary.
2y
2
Check that all reset/enable have an external pull-up or pull-down resistors. Rep...
2y
Sure, I can help check that. The reset or enable signals are typically associated with flip-flops and microcontrollers (in this case, suggested by the flip-flops named FF1 and FF2 in your design).
Let's start by identifying the reset and enable pins from your project:
- FF1 (CD4013BM): RESET1 (pin 4), RESET2 (pin 10)
- FF2 (CD4013BM): RESET1 (pin 4), RESET2 (pin 10)
The pull-up or pull-down resistors would usually be connected to these pins on a net basis, so let’s check on all relevant nets:
- Net: 36eeba9fb1905b9cfe54456587e385f4: Connected to FF2:RESET1
- Net: 4ea1abf66780b1dea5a955993459c934: Connected to FF1:RESET1
- Net: 4e30ceca3d8403d68c12d4a61a07b244: Connected to FF1:RESET2
- Net: 208bed4dbefb1e0f74b6a4b4cbc12b64: Connected to FF2:RESET2
From the information you've provided, it seems each of these nets only include the reset pin of their corresponding flip-flop. There are no resistors specified in these nets that would serve as pull-up or pull-down resistors.
To ensure your circuit will work as intended:
- Add pull-up or pull-down resistors to Net: 36eeba9fb1905b9cfe54456587e385f4 (for FF2:RESET1)
- Add pull-up or pull-down resistors to Net: 4ea1abf66780b1dea5a955993459c934 (for FF1:RESET1)
- Add pull-up or pull-down resistors to Net: 4e30ceca3d8403d68c12d4a61a07b244 (for FF1:RESET2)
- Add pull-up or pull-down resistors to Net: 208bed4dbefb1e0f74b6a4b4cbc12b64 (for FF2:RESET2)
Please remember these configurations depend on whether you intend to have active-high or active-low resets.
If you need more specific help in terms of resistor values or connection details, please provide more information about your design's requirements.
2y
5
what does 'REF', override rule for 'REF'
2y
'REF' typically refers to the reference designator for components in a schematic or printed circuit board (PCB) layout. It provides a unique alphanumeric identifier to each component on the schematic, making it easier to follow layout and debugging processes.
For example, resistors might be labeled with designators such as R1, R2, R3 and so on, capacitors as C1, C2, and so on. Integrated circuits may use U (for 'unit'), transistors may use Q, etc.
In the context of the 'override rule for REF', it usually implies that a special rule has been set to override the default automatic assignment or manipulation of the reference designators during the design or annotation processes. This typically involves keeping certain reference designators fixed or following a specific naming strategy that deviates from the default.
However, without specifics on the tool and context where 'override rule for REF' is mentioned, a concrete explanation cannot be provided. I assumed here we were discussing common electronics design practices. If you have a different context in mind, feel free to provide more details.
2y
4
Arduino_RESET_Signal1
ACC
Arduino 5V
Arduino_RESET_Signal2
Arduino_SET_Signal2
Arduino_SET_Signal1
Relay 2 (OFF or ACC)
GND (OFF)
Relay 1 (OFF or ON)
Reviews
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibraryjharwinbarrozo16.2k- A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibraryjharwinbarrozo1.5M
- A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibraryjharwinbarrozo1.5M
- An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.Terminal
- Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portaljharwinbarrozo43.0M
- General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliantjharwinbarrozo1.2M
- 10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcanjharwinbarrozo1.2M
- Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlinkjharwinbarrozo700.5k
Print-to-Start Circuit
Welcome to your new project. Imagine what you can build here.
Properties
Properties describe core aspects of the project.
Pricing & Availability
Distributor | Qty 1 |
|---|---|
Digi-Key | $5.53–$5.62 |
LCSC | $8.11 |
Mouser | $7.76 |
Controls
Welcome 👋
Flux helps you build PCBs faster with an AI teammate!
Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.
inolan10
copilot