Energy Harvesting PMU Schematic
Thought for 3 mins 47 sec
Connections to Make
Connections to Remove
Table
| Net | Connections |
|---|---|
| 3V3_DIGITAL | U2:5, J2:1 |
| GND | U2:1, U2:3, C5:2, R5:2, J2:2, J3:2 |
| CT_SIGNAL_AC | R4:1, C10:1, J3:1 |
Table
| Net | Connections |
|---|---|
I can apply these net connections for Group 4.
perform ERC
Thought for 41 sec
ERC Summary for CT_Energy_Harvester_PMU
Critical Errors:
- Overlapping Copper (51 errors): Multiple copper shapes are shorted together (e.g. GND vs HARVEST_IN, etc.).
- Airwires (26 errors): Numerous nets (e.g. D3 net, U1:VIN to D3, etc.) have unrouted connections.
- Layers with Multiple Fills (1 error): Conflicting copper fills on the same layer.
- Missing Manufacturer Part Number (1 error): SUBLAYOUT1 (the LDO symbol) has no MPN assigned.
Warnings: None
Successes: Many nets correctly routed and parts have footprints.
Successes: Many nets correctly routed and parts have footprints.
Next Steps:
- Resolve copper overlaps by adjusting trace/fill shapes.
- Route all airwires.
- Assign an MPN to SUBLAYOUT1.
- Re-run ERC to ensure no remaining critical errors.
Let me know which issue you’d like to tackle first.
Adjust copper clearance
Add 3.3V LDO
Trace width for VIN
Add manufacturer part number
Clearance around SW node
Welcome 👋
Flux helps you build PCBs faster with an AI teammate!
Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.