Chat

Welcome to Flux

Treat Flux like your intern. Tell it what you'd like to build and it'll get to work. You can also ask it questions, brainstorm ideas, and teach it your preferences. Learn More

Explain this part
Write a part description
Describe each pin
Operating conditions
Electrical max ratings
Part Specifications
Application circuits
Verify Part Details
Recommend similar parts
Check availability & lifecycle
3
puedes conetar este circuito? es un circuito que utiliza el transistor omo switc...
fredddyjcm

fredddyjcm

@copilot puedes conetar este circuito? es un circuito que utiliza el transistor omo switch para encender el led
2y

copilot

Claro, te puedo guiar sobre cómo conectar tu circuito utilizando el transistor 2N2222 como switch para encender el LED (D1). Basándome en los componentes de tu proyecto, aquí tienes una manera estándar de hacerlo:
  1. Fuente de alimentación: Primero, necesitarás una fuente de alimentación. Vamos a suponer que estás usando una fuente de 5V. Si tu fuente de voltaje es diferente, por favor ajusta las resistencias correspondientemente.
  2. Transistor como switch: El transistor 2N2222 funcionará como switch. Cuando la base del transistor (pin B) recibe un voltaje suficientemente alto, permite que la corriente fluya desde el colector (pin C) hacia el emisor (pin E), encendiendo así el LED.
Vamos a proceder con las conexiones. Asumiremos valores típicos y configuraciones comunes para este tipo de circuito:
  • R1 será utilizada como resistencia de base para limitar el corriente que va de la fuente de señal al pin B del transistor (2N2222).
  • R2 limitará la corriente a través del LED (D1) para evitar que se dañe por exceso de corriente.
Conexiones:
  1. Fuente de alimentación al LED a través de R2:
    • Conecta el polo positivo de la fuente de alimentación (5V) a R2:1.
    • Conecta R2:2 a D1:A. Esto limita la corriente que fluye hacia el LED, protegiéndolo.
  2. LED al colector del transistor:
    • Conecta D1:K (cátodo del LED) al Q1:C (colector del transistor).
  3. Emisor del transistor a tierra:
    • Conecta Q1:E (emisor del transistor) al polo negativo de la fuente de alimentación (GND).
  4. Resistencia de base al transistor:
    • Conecta una extremo de R1 a Q1:B (base del transistor).
    • El otro extremo de R1 necesitará ser conectado a una fuente de señal que controle el switch (transistor). Esta fuente de señal puede ser un pin de un microcontrolador o un interruptor manual dependiendo de tu proyecto.
  5. SW1 para controlar la base del transistor (si decides usar el SW1 como tu fuente de señal de control):
    • Conecta SW1:P1 al otro extremo de R1.
    • Conecta SW1:P2 al polo positivo de la fuente de alimentación (5V).
Resumen de conexiones:
  • Conecta el polo positivo de la fuente de alimentación a R2:1.
  • Conecta R2:2 a D1:A.
  • Conecta D1:K a Q1:C.
  • Conecta Q1:E a GND.
  • Conecta un extremo de R1 a Q1:B.
  • Opcional: Conecta el otro extremo de R1 a SW1:P1 y SW1:P2 al polo positivo de la fuente de alimentación para control manual.
Asegúrate de verificar la orientación correcta del LED y las polaridades de todos los componentes antes de energizar tu circuito.

1

2y
R2
Resistance
500 Ω
R1
Resistance
500 Ω
SW1
D1
Q1
Line: 11:19: 'event' is declared but its value is never read.Line: 16:58: 'uid' is deprecated.Line: 17:60: 'uid' is deprecated.Line: 22:24: 'event' is declared but its value is never read.Line: 30:23: 'event' is declared but its value is never read.Line: 15:9: Type 'Readonly<{}>' is not assignable to type 'number'.Line: 16:9: Type 'string | undefined' is not assignable to type 'string'. Type 'undefined' is not assignable to type 'string'.Line: 17:9: Type 'string | undefined' is not assignable to type 'string'. Type 'undefined' is not assignable to type 'string'.Line: 25:9: Type 'Readonly<{}>' is not assignable to type 'number'.Line: 33:60: Property 'current' does not exist on type 'ElementNode | ElementTerminalNode | PcbLayoutNode | PcbLayoutRuleSetNode | RouteNode'. Property 'current' does not exist on type 'ElementNode'.Line: 33:74: The right-hand side of an arithmetic operation must be of type 'any', 'number', 'bigint' or an enum type.Line: 36:59: Property 'voltage' does not exist on type 'ElementNode | ElementTerminalNode | PcbLayoutNode | PcbLayoutRuleSetNode | RouteNode'. Property 'voltage' does not exist on type 'ElementNode'.Line: 41:61: Property 'voltage' does not exist on type 'ElementNode | ElementTerminalNode | PcbLayoutNode | PcbLayoutRuleSetNode | RouteNode'. Property 'voltage' does not exist on type 'ElementNode'.Line: 46:61: Property 'current' does not exist on type 'ElementNode | ElementTerminalNode | PcbLayoutNode | PcbLayoutRuleSetNode | RouteNode'. Property 'current' does not exist on type 'ElementNode'.Line: 57:55: Property 'voltage' does not exist on type 'ElementNode | ElementTerminalNode | PcbLayoutNode | PcbLayoutRuleSetNode | RouteNode'. Property 'voltage' does not exist on type 'ElementNode'.Line: 57:87: Property 'voltage' does not exist on type 'ElementNode | ElementTerminalNode | PcbLayoutNode | PcbLayoutRuleSetNode | RouteNode'. Property 'voltage' does not exist on type 'ElementNode'.Line: 58:17: Property 'displayInLine' does not exist on type 'OutputNode'. Did you mean 'displayInline'?
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
    jharwinbarrozo
    16.3k
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • RMCF0805JT47K0
    RMCF0805JT47K0
    General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
    jharwinbarrozo
    1.1M
  • 1070TR
    1070TR
    Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
    jharwinbarrozo
    700.5k

Res_0603-Template

Chip Resistor 0603 (1608 Metric) Moisture Resistant Thick Film

Properties

Ω

Resistor

R

Pricing & Availability

Distributor

Qty 1

Digi-Key

$2.01–$2.99

LCSC

$3.00

Mouser

$2.52

Controls