Review the BOM File
Open the
LED_Driver_Partial_BOM.csv to see the list of components required.
Open the Library Search Panel
In the left column of the Flux editor, switch to the Library Search tab.
Search for Each Component
For each item in your BOM, type its name or part number into the library search bar. For example, if your BOM lists a decoupling capacitor, enter "100nF capacitor," "10μF capacitor," or the specific part number provided, as applicable.
Add Components to the Schematic
- Once you find a component in the library, drag it onto your schematic.
- Ensure you update the designator as needed (e.g., R1 for resistors or U1 for ICs) to match your BOM.
- Repeat this for each component listed in the BOM.
Verify Component Details
After placing the components, verify that their electrical specifications (values, footprints, etc.) match the entries from your BOM. You can click the component to review its properties in the right-side inspector.
Save Your Schematic
Once all parts are placed and their properties reviewed, save your schematic.