USB-C Temperature and Humidity Sensor Node Design

flux

1:06

Planning sensor node steps.

Detailing sensor node specifications.

Choosing the right module.

Accessing knowledge base.

Planning power protection and components.

I’ll create your low‑power USB‑C environmental node with Wi‑Fi + BLE, T/RH sensing, and full input protection. Here’s the plan:

Power & protection

USB‑C (5 V sink) with CC resistors to advertise 1.5 A/3 A, ESD on VBUS/CC/(D+/D− if used).
eFuse for reverse, OVP, UVLO, OCP.
Low‑Iq 5 V→3.3 V buck; account for minimum‑load behavior if needed.

Compute

Ultra‑low‑power 2.4 GHz Wi‑Fi + BLE module with onboard antenna, boot/program circuits, status LED.
Optional USB D+/D− to MCU if native USB is supported.

Sensing (I²C)

Low‑power digital T/RH sensor, decoupling per datasheet.
I²C pull‑ups: 4.7k default; keep total bus capacitance ≤400 pF.
Place sensor for good airflow.

Connectivity & layout

Wire power rails, I²C, debug/program header.
Apply 2.4 GHz antenna keepout, short decoupling paths; auto‑layout then refine RF and sensor placement.

Reviews & outputs

Run ERC/DRC, check parts availability, and prepare manufacturing files.

Before I start, quick choices:

Do you prefer native‑USB MCU programming (no bridge) or is power‑only USB‑C OK?
Should we advertise 1.5 A or full 3 A on USB‑C (default‑power 5 V only)?
Any accuracy/grade preference for the T/RH sensor (e.g., ±0.1 C class)?

Click Start on the plan bar when ready, and I’ll execute this plan.

Plan

#Goal

Design a low-power environmental sensor node for consumer use that integrates 2.4 GHz Wi‑Fi and Bluetooth (802.11 b/g/n + BLE 5.x) connectivity, powered solely by a 5 V USB‑C source. The design must support USB‑C power inputs from 0.5 A to 3 A and include robust protections (reverse polarity, OVP, UVLO, and OCP) as well as a digital temperature/humidity sensor with proper I²C interfacing and airflow provision.

#Implementation plan

Power & Protection Subsystem
1. Add a USB‑C receptacle configured for a 5 V sink and support for 0.5–3 A sources.
2. Incorporate CC resistors designed for 1.5 A/3 A current advertisement.
3. Implement ESD protection on VBUS, CC, and (if needed) USB data lines.
4. Select and add an eFuse circuit to provide reverse polarity, overvoltage (OVP), under-voltage (UVLO), and overcurrent (OCP) protection.
5. Integrate a low‑Iq 5 V-to‑3.3 V buck converter, ensuring awareness of its minimum-load behavior (add a load resistor if needed).
Compute Subsystem
1. Select and add an ultra‑low‑power 2.4 GHz Wi‑Fi + BLE MCU module with an onboard antenna (e.g., a module supporting 802.11 b/g/n and BLE 5.x).
2. Integrate boot/program circuits and a status LED for diagnostic purposes.
3. (Optional) Connect USB D+/D‑ lines to the MCU if native USB functionality is supported.
Sensor and I²C Interface
1. Select and add a low‑power digital temperature/humidity sensor with I²C interface.
2. Add decoupling capacitors as per sensor requirements.
3. Connect standard 4.7k pull‑ups to the I²C lines while ensuring the total bus capacitance remains ≤400 pF.
4. Allocate layout space for adequate sensor airflow.
Connectivity and Debug
1. Create necessary I²C connections between the MCU and the sensor.
2. Add a debug/program header for in-circuit programming and troubleshooting.
Layout and RF Considerations
1. Define antenna keepout zones and maintain short decoupling paths to meet RF performance specifications.
2. Perform auto‑layout placement for critical components and then refine placement particularly around the 2.4 GHz wireless components and sensor.
Final Reviews
1. Run ERC/DRC to verify schematic and layout integrity.
2. Confirm part selections and availability for robustness in consumer applications.
3. Generate manufacturing outputs for production.

#Success criteria

The sensor node reliably operates from a 5 V USB‑C input within a 0.5–3 A range with all protection features active (reverse, OVP, UVLO, OCP).
The dual‑radio MCU enables stable Wi‑Fi and BLE connectivity and the digital temperature/humidity sensor operates correctly over the I²C bus with proper pull‑ups and low‑power operation.
The layout adheres to 2.4 GHz RF design guidelines, ensuring optimal performance and sensor airflow.

124 days

evildr2002

how may pads are on my board

99 days

flux

1:45

Assessing board layout tools.

Determining pad count process.

Accessing knowledge base.

Analyzing the PCB layout.

Focusing on pad count response.

Listing element designators.

Analyzing the PCB layout.

Calculating.

Considering pad and hole types.

You currently have 247 pads on the board (component and mounting pads only; vias not included). Want a breakdown by component or by SMD vs through-hole?

Ask for vias too

Get pad breakdown

SMD vs through-hole

Verify specific connector

Check mounting holes

99 days

GPIO 44

GPIO 48

B+

L-On

GPIO 47

B+

GPIO 43

L-On

GPIO 08

Polarity 1

Esp32 Right

Charger-C

Polarity 2

Charger

BMS Coms

PowerSW-2

Reviews

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
15.9k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
jharwinbarrozo
1.2M
875105359001
10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
jharwinbarrozo
1.1M

Project Name

Description

Welcome to your new project. Imagine what you can build here.

Properties

Properties describe core aspects of the project.

Pricing & Availability

Distributor	Qty 1
Arrow	$49.13–$56.00
Digi-Key	$6.91–$40.18
LCSC	$94.47
Mouser	$58.22–$61.54
TME	$3.92
Verical	$45.55–$277.72

Controls

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.