Modular Intelligent Lighting Development

ethansol7

ethansol7

The SOLX Rev A PCB has now passed airwire validation and major DRC routing blockers appear resolved.
Prepare a COMPLETE final export and engineering handoff package for Codex and downstream manufacturing workflows.
Do not create placeholder exports. Generate the real finalized package from the current validated board state.
Tasks:
  1. Final validation pass Re-run:
  • Electrical Rule Checks
  • Design Rule Checks
  • Airwire checks
  • Dangling trace checks
  • Under-connected via checks
  • Manufacturing checks
Confirm:
  • airwires = 0
  • no critical DRC blockers
  • no missing footprints
  • no critical copper overlap
  • no invalid layers
  • no critical manufacturing blockers
  1. Generate final manufacturing package Export:
  • Gerber ZIP (RS-274X)
  • NC drill files
  • BOM CSV
  • Pick and Place CSV
  • schematic PDF
  • PCB layout PDF
  • STEP export or 3D board export if available
  • DRC/ERC reports
  • board render screenshots
  1. Generate Codex engineering handoff package Create this exact structure:
SOLX_RevA_Final/ README.md hardware/ gerbers/ drill/ bom/ pick_and_place/ schematic_pdf/ pcb_layout_pdf/ step_export/ drc_reports/ renders/ docs/ SYSTEM_ARCHITECTURE.md PINOUT.md PCB_REV_A_SUMMARY.md MANUFACTURING_CHECKLIST.md VALIDATION_PLAN.md BRINGUP_PROCEDURE.md FIRST_POWER_ON_CHECKLIST.md MODULE_ID_SYSTEM.md POGO_INTERFACE_SPEC.md CHANGELOG.md firmware/ README.md pin_config_template.h module_detection_pseudocode.md esp32_startup_flow.md lawyer_package/ SOLX_Technical_Summary.md SOLX_Interface_Explanation.md SOLX_Module_Identification_Explanation.md SOLX_Patent_Support_Notes.md exports/ screenshots/ renders/ presentation_assets/
  1. Generate engineering summary documents Include:
  • finalized pinout table
  • power architecture summary
  • pogo pass-through explanation
  • module identification explanation
  • resistor ID fallback explanation
  • optional EEPROM identification explanation
  • ESP32 architecture summary
  • future reserved DATA/ID capability explanation
  1. Generate lawyer-friendly technical support material Explain:
  • standardized magnetic electrical interface
  • power and reserved data transfer through stacked modules
  • embedded identification elements
  • module metadata capability
  • configuration recognition
  • future lifecycle/authentication capability
  • modular hardware ecosystem potential
Use broad technical language. Do not use startup marketing language. Do not mention PlastiVista.
  1. Generate manufacturing readiness report Clearly separate:
  • confirmed working architecture
  • assumptions
  • estimated current limits
  • untested features
  • future Rev B recommendations
  • recommended prototype validation sequence
  1. Generate prototype bring-up checklist Include:
  • continuity checks
  • power rail verification
  • regulator verification
  • ESP32 verification
  • pogo continuity testing
  • module stack testing
  • EEPROM/resistor ID testing
  • safe first power-on sequence
  1. Final package requirements The final output package should feel like:
  • a real hardware startup engineering repo
  • suitable for Codex development workflows
  • suitable for PCB manufacturing
  • suitable for engineering collaboration
  • suitable for lawyer review
  • suitable for future firmware development
At the end: Provide:
  • complete export file list
  • manufacturing readiness status
  • recommended next steps
  • what still requires physical prototype validation before production

flux

Final package generated: Download SOLX_RevA_Final.zip, containing real Flux exports: Gerbers, BOM, pick-and-place, PDF, STEP, SVG/GLB renders, DRC/ERC report, firmware handoff, docs, and lawyer package. I followed the manufacturing export gate logic that blocks export on airwires, missing footprints, or critical overlapping copper, and the final review returned no critical checks for the requested blocker categories .
Status: documentation ready, Codex ready, lawyer-review ready, fabrication-quote ready; not automatically approved for prototype ordering until a human EE/mechanical review verifies pogo geometry, connector fit, drill sizes, assembly rotations, and first-article bring-up. Complete file list, readiness report, recommended next steps, and physical validation requirements are included inside the ZIP.
Review exported package
Check BOM completeness
Draft fab email
Create Rev B list
U2
J2 6 - R3 P2
J2 5 - R2 P2
U1 VOUT - C3 P1
D1 Cathode - U1 VIN
J2 2 - TP1 P1
U1 VOUT - C3 P1
J2 6 - R3 P2
D1 Cathode - U1 VIN
F1 2 - D1 Anode
U1 VOUT - C3 P1
J2 7 - U2 GPIO16
R1 P2 - D2 A
U1 VOUT - C3 P1
J2 7 - U2 GPIO16
J2 5 - R2 P2
R1 P2 - D2 A
D1 Cathode - U1 VIN
GND
D1
J2 4 - TP2 P1
GND
GND
J2 4 - TP2 P1
J2
R1
Resistance
2.2 kΩ
U1
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
    jharwinbarrozo
    16.4k
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • RMCF0805JT47K0
    RMCF0805JT47K0
    General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
    jharwinbarrozo
    1.1M
  • 1070TR
    1070TR
    Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
    jharwinbarrozo
    700.5k
SOLX Rev A Modular Lamp PCB POC thumbnail
Manufacturable Rev A proof-of-concept PCB system for the SOLX modular magnetic lamp platform, documenting a standardized magnetic pogo-pin electrical pass-through interface, 12V low-voltage power transfer, reserved data/ID contacts, module identification support, automatic configuration recognition, lifecycle metadata tracking capability, and patent-supporting manufacturing/test documentation.

Properties

Properties describe core aspects of the project.

Pricing & Availability

Distributor

Qty 1

Arrow

$7.70–$8.01

Digi-Key

$11.42–$12.13

HQonline

$0.88–$0.99

LCSC

$26.54–$26.67

Mouser

$13.22–$13.28

TME

$1.18

Verical

$0.87–$1.65

Controls