RF Board Connection Adaptation
Thought for 6 sec
I’ll export IPC-2581C and DXF now, then provide the downloadable ZIP/file links.
Worked for 59 sec
Pre-export gates are clean. I’m exporting IPC-2581C and DXF now; if either export is not already zipped, I’ll wrap it into a ZIP.
Worked for 30 sec
IPC-2581C exported successfully as a file, so I’ll wrap it into a ZIP. DXF export failed once; I’m retrying DXF before packaging.
Thought for 7 sec
DXF exported successfully as a ZIP. I’m wrapping the IPC-2581C file into its own ZIP now.
Thought for 20 sec
The zip wrapper tool didn’t receive the IPC attachment automatically, so I’m doing one direct download-and-zip attempt from the signed IPC-2581C URL.
Thought for 35 sec
DXF ZIP is ready:
IPC-2581C exported successfully, but Flux produced it as a single
.ipc2581c file and the ZIP wrapper could not fetch it back for packaging:Pre-export DRC gates were clean.
Package and verify exports
Export ODB++ too
Export STEP model
Check package contents
Create fab email
