Schematic for QrisPaymentSoundBox: QrisPaymentSoundBox with Soft-...

Desain Alat Notifikasi Pembayaran

flux

1:01

General

Chat History

Project

Knowledge Base

Plan

Accessed Knowledge (1)

Planning for BOM adjustments.

Formulating a BOM cleanup plan.

Using Knowledge Base Tool.

Setting up a BOM cleanup strategy.

I will clean your BOM by removing duplicates and unused parts, and align the schematic accordingly.

Plan summary:

Audit BOM/schematic for duplicate designators/MPNs and unconnected parts.
Remove duplicates, delete unused/legacy parts, and reassign designators.
Update BOM quantities/properties to match the schematic.
Re-run ERC/BOM review and report changes.

Before I start: do you want me to only remove exact duplicates, or also merge “Generic” passives with identical values (e.g., multiple 100 nF 0603 caps) into a single BOM line item?

49 days

Started implementing a plan

#Goal

- Clean the BOM for the QrisPaymentSoundBox project by removing duplicate parts (e.g., duplicate resistors such as R17/R19) and unused components (such as legacy parts like the old SW1 slide and LED2) while ensuring that all changes, including LED and soft-latch power button updates, are accurately reflected in the schematic and BOM.

#Implementation plan

1. Audit the current BOM and schematic

1. Use ERC/BOM review tools to identify duplicate components by scanning MPNs and designators.

2. Identify components with no net connections (unused or legacy parts) by reviewing schematic connectivity.

2. Remove duplicate components

1. Consolidate duplicates (e.g., repeated resistor entries) into a single instance.

2. Reassign designators sequentially to ensure consistency in the schematic and BOM.

3. Delete unused/legacy components

1. Remove legacy parts such as the old SW1 slide and LED2 from the schematic.

2. Verify that no components with missing net connections remain.

4. Update the BOM

1. Adjust BOM entries, quantities, and part properties to reflect the changes (including updates for LED and switch properties).

2. Re-run the ERC/BOM review to ensure no missing references or broken nets remain.

#Success criteria

- Duplicate parts are consolidated and designators sequentially reassigned.

- Unused components (e.g., legacy parts like the old SW1 slide and LED2) are removed from the schematic and BOM.

- The updated BOM reflects correct quantities and up-to-date part properties.

- The ERC/BOM review does not report any errors or missing net connections.

49 days

Asking user cleaning scope...

0:35

Autopilot

Started: Use @message to ask the user: do you want to only remove exact duplicates, or also merge generic passives with identical values (e.g., multiple 100 nF 0603 caps) into single BOM lines?

49 days

Asking user duplicate removal scope...

0:47

Autopilot

Message

Started: Use @message tool to ask the user: do you want me to only remove exact duplicates, or also merge generic passives with identical values into single BOM lines?

Stopping: undefined

49 days

flux

is thinking...

49d 16:52:11

The response is taking longer than expected. Please try again with a more focused question.

49 days

flux

0:00

Autopilot

I haven’t started the BOM cleanup yet. Should I remove only exact duplicates, or also consolidate generic passives with identical values into single BOM lines?

49 days

Needs more info.

Show Plan

Reviews

Electrical Rule Checks

Missing Footprints

Reports parts that have no footprint.

Design Rule Checks

Overlapping Copper

Reports copper elements that are shorting.

Invalid Layer

Reports nodes that are assigned to a layer that doesn't exist in the layout stackup.

Component Overrides

Reports components that have been modified using the "!important" flag.

Airwires • 72

	Designators	Net
	U2:～{CS}, J4:Pin_3	～{CS}
	C2:P1, R19:P1	3V3
	C2:P1, U3:VDD	3V3
	IC1:AVDD, IC1:CPVDD	3V3
	IC1:DVDD, IC1:CPVDD	3V3
	R3:P1, IC1:DVDD	3V3
	R3:P1, J3:1	3V3
	R4:P1, R2:P1	3V3
	R4:P1, R5:P1	3V3
	R5:P1, J4:Pin_1	3V3
	R18:P1, R2:P1	3V3
	R18:P1, R3:P1	3V3
	R19:P1, IC1:AVDD	3V3
	R_BLUE:P1, R_RED:P1	3V3
	U1:3.3V, IC1:CPVDD	3V3
	U2:VCC, J4:Pin_1	3V3
	R14:P1, R13:P2	AUDIO_IN
	Q2:S, R17:P1	BAT
	U4:BAT, J_BAT:P1	BAT
	R7:P2, IC1:BCK	BCK
	R7:P2, R7:P1	BCK
	C12:P2, R13:P1	CAP_SERIES
	U2:CLK, J4:Pin_4	CLK
	R9:P2, IC1:DIN	DIN
	R9:P2, R9:P1	DIN
	C1:P1, R2:P2	EN
	J3:3, R2:P2	EN
	U1:EN, R2:P2	EN
	C2:P2, Via-1-4:Via-1-4	GND
	IC1:DGND, IC1:AGND	GND
	SW2:COM_1, SW3:COM_1	GND
	U1:GND, J3:2	GND
	U2:GND, J4:Pin_2	GND
	Via-1-2:Via-1-2, J_BAT:P2	GND
	Via-1-5:Via-1-5, IC1:AGND	GND
	Via-3-1:Via-3-1, J4:Pin_2	GND
	Via-3-4:Via-3-4, C14:P2	GND
	Via-3-4:Via-3-4, C15:P2	GND
	R3:P2, J3:4	IO0
	U1:IO0, R3:P2	IO0
	U2:DI(IO0), J4:Pin_5	IO0
	U2:DO(IO1), J4:Pin_6	IO1
	R4:P2, J4:Pin_7	IO2
	U2:WP#(IO2), J4:Pin_7	IO2
	R5:P2, J4:Pin_8	IO3
	U2:HOLD#orRESET#(IO3), J4:Pin_8	IO3
	C12:P1, IC1:OUTL	LOUT
	R8:P2, IC1:LRCK	LRCK
	R8:P2, R8:P1	LRCK
	R10:P2, R10:P1	MCLK
	Q1:G, R6:P2	NPG
	Q1:G, SW1:1	NPG
	U4:NPG, R6:P2	NPG
	U1:RXD0, J3:6	RXD0
	C13:P1, R6:P1	SoftLatchGate
	C13:P1, R17:P2	SoftLatchGate
	Q1:D, J2:V-BUS	SoftLatchGate
	Q1:D, R6:P1	SoftLatchGate
	Q2:G, R17:P2	SoftLatchGate
	R16:P1, Q1:D	SoftLatchGate
	R16:P2, R16:P1	SoftLatchGate
	R16:P2, U5:IN	SoftLatchGate
	U5:EN, U5:IN	SoftLatchGate
	J_SPK:P2, U3:VO2	SPK-
	J_SPK:P1, U3:VO1	SPK+
	U1:TXD0, J3:5	TXD0
	R19:P2, C15:P1	VOL_DN
	R19:P2, SW3:NO_1	VOL_DN
	U1:IO33, R19:P2	VOL_DN
	R18:P2, C14:P1	VOL_UP
	SW2:NO_1, C14:P1	VOL_UP
	U1:IO32, R18:P2	VOL_UP

Deprecated Rules

Reports nodes that are using rules that are not supported anymore.

Layers with Multiple Fills • 1

	Layer	Net
	All	GND, GND

Floating Copper

Detect any via, trace or copper fill island that is not connected to any net.

Protected Intrusions

Reports intrusions from objects of other nets into polygons or fills that have the Protected layout rule applied.

Manufacturing

Manufacturer Part Number • 31

	Designator	MPN
	C7	None
	C8	None
	C9	None
	C10	None
	C13	None
	C13	None
	C14	None
	C14	None
	C15	None
	C15	None
	C16	None
	C17	None
	LED_BLUE	None
	LED_BLUE	None
	R6	None
	R15	None
	R15	None
	R16	None
	R16	None
	R17	None
	R17	None
	R18	None
	R18	None
	R19	None
	R19	None
	R_BLUE	None
	R_BLUE	None
	R_BLUE	None
	R_RED	None
	R_RED	None
	R_RED	None

Parts Available

Beta

Checks that all parts have a part number and are available from distributors.

System Checks

Auto-Layout

Beta

Reports issues with Auto-Layout if Flux cannot route something or must ignore a configuration.

Passive Components

Resistor Power Rating

Beta

Checks that the power traveling across a given resistor is under its rating with 50% headroom.

Learn more

Pull Up/Pull Down Presence

Beta

Checks that IC pins that require pull up or pull down resistors have them.

Learn more

Capacitor Voltage Rating

Beta

Checks that capacitors have appropriate voltage ratings to prevent overheating and ensure reliable circuit operation.

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #generics
jharwinbarrozo
15.1k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
jharwinbarrozo
1.2M
875105359001
10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
jharwinbarrozo
1.1M

Inspect

QrisPaymentSoundBox

Controls

Properties

System Architecture

```mermaid
flowchart TD
  subgraph Protection_Subsystem
    USBIN["USB Input"] --> GT["GT-USB-7007B"] --> SLM["SLM6400"] --> SMBJ["SMBJ5.0CA"] --> PESD["PESD5V0U2BT"] --> USBPROT_OUT["Protected USB"]
  end
  subgraph Power_Subsystem
    USBPROT_OUT --> SY["SY8208BQNC Buck"]
    BATTERY["Battery"] --> SY
    SY --> V33["3.3V Rail"]
  end
  subgraph SoftLatch_Subsystem
    BATTERY --> BTN["Power Button"]
    BTN --> Q2["2N7002"]
    Q2 --> GateNode["Soft-Latch Gate Node"]
    GateNode -->|2s RC| AO4407["AO4407A PFET"]
    AO4407 --> VBATSW["VBAT_SW"]
  end
  subgraph Controls_Subsystem
    V33 --> VOLUP["VOL_UP Button\n(IO32)"]
    VOLUP --> R1["10k Ohm Pull-up"] --> V33
    VOLUP --> C1["100nF Debounce"] --> GND["GND"]
    V33 --> VOLDN["VOL_DN Button\n(IO33)"]
    VOLDN --> R2["10k Ohm Pull-up"] --> V33
    VOLDN --> C2["100nF Debounce"] --> GND
  end
  subgraph PMIC_Subsystem
    VBUS["VBUS"] --> EN_GATE["EN Gate"] --> U5EN["U5 EN"]
    VBUS --> U5IN["U5 VIN"]
    U5IN --> U5["MP2315SGJ"]
    U5 --> V33
  end
```

Availability & Pricing

Distributor		Qty 1
	Arrow	$2.57–$4.53
	Digi-Key	$1.41–$2.50
	LCSC	$1.36–$1.52
	Mouser	$5.37
	TME	$4.10
	Verical	$2.39–$53.88

Assets

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.