Part Information Review
Thought for 52 sec
I reviewed the part project and found that it currently looks like a generic 2-terminal resistor part, not a fully identified manufacturer part.
What I found
Project metadata
Table
| Field | Current value | Status |
|---|---|---|
| MPN | RES | Too generic to identify an official part |
| Manufacturer | Not set | Missing |
| Part Type | Resistors | Present |
| Designator Prefix | R | Present |
| Datasheet | Not set | Missing |
Table
| Item | Result |
|---|---|
| Terminal count | 2 |
| Terminal numbering | 1 and 2 |
| Pin type | Both are Unspecified |
| Nets | None defined |
Table
| Item | Result |
|---|---|
| Footprint present | Yes |
| Package text found in footprint | RC0402N_YAG |
| Pad count | 2 |
That strongly suggests the footprint is for an 0402 chip resistor.
Datasheet search result
I checked searchable uploaded files and did a web search. I did not find a trustworthy official datasheet for MPN RES or manufacturer RES. The search results indicate that “RES” is being interpreted as shorthand for “resistor,” not a real manufacturer part number.
So I did not update the Datasheet property, because that would risk inserting an incorrect URL.
Cross-check summary
What is consistent
Table
| Area | Assessment |
|---|---|
| Symbol pin count vs resistor type | Consistent |
| Footprint pad count vs symbol terminals | Consistent |
| 2-pin resistor concept | Consistent |
Table
| Area | Why |
|---|---|
| Official package name | No valid MPN/manufacturer |
| Pad geometry vs datasheet | No official datasheet |
| Pin descriptions vs datasheet | No official datasheet |
| Electrical specs | No official datasheet |
Table
| Issue | Severity |
|---|---|
| Manufacturer name missing | Warning |
| Datasheet property missing | Warning |
| MPN is generic/non-resolvable (RES) | Warning |
| Pin types are Unspecified | Minor |
| No pin descriptions beyond numbers | Minor |
Table
| Spec | Current evidence |
|---|---|
| Part class | Resistor |
| Terminal count | 2 |
| Likely package | 0402 |
| Footprint label | RC0402N_YAG |
- The symbol and footprint appear internally consistent for a generic 2-pin chip resistor.
- But this is not yet a validated manufacturer part, because the metadata is incomplete.
- Without a real MPN + manufacturer, I can’t reliably verify package dimensions, pin descriptions, or official specs against a datasheet.
If you want, I can do the next pass once you provide the exact resistor MPN, and then I can:
- find the official datasheet,
- update the Datasheet property,
- verify the 0402 footprint dimensions,
- and check whether the terminal metadata should be tightened up.
Fix resistor metadata
Find real resistor MPN
Check 0402 footprint
