Part Review and Datasheet Update
Thought for 4 sec
I’ll review the part metadata, find and attach an official datasheet if missing, then compare the symbol, footprint, and pin descriptions against the datasheet and summarize any mismatches.
Thought for 2 mins 52 sec
I found the official RECOM datasheet PDF; the project currently points to an RS product page, so I’m updating the Datasheet URL to the official PDF before completing the cross-check.
Worked for 3 mins 43 sec
Completed the R24P21509D part review and created the report: R24P21509D Part Review.
Open items:
- Project-level Part Type is wrong: it says
Resistors, but this is a RECOM isolated DC/DC converter. - Project-level Datasheet URL still points to the RS page; I added the official RECOM PDF URL to the inspected component property, but the project-level datasheet field wasn’t exposed for direct editing.
- Pinout and footprint appear to match the official datasheet; no pin-number mismatch found.
Suggested next steps:
- Update project-level metadata to classify this as a DC/DC converter or power module.
- Add explicit pin descriptions and electrical pin types.
- If needed, I can continue by cleaning up the part metadata for publication quality.
Clean metadata and verify
Fix metadata issues
Add pin descriptions
Run final review
Check footprint dimensions
Refine this doc
Ask about this doc
R24P21509D Part Review
Scope
Review of available project part information for RECOM Power R24P21509D and cross-check against the official manufacturer datasheet.
Project metadata observed
- Project / part name: R24P21509D
- Manufacturer part number: R24P21509D
- Manufacturer: RECOM Power
- Existing project Datasheet URL:
http://uk.rs-online.com/web/p/products/7865267(RS distributor product page) - Designator prefix: PS
- Project Part Type:
Resistors— this appears incorrect for a DC/DC converter module. - Published part UID:
c5271f6a-fece-4c3d-8c6f-b37b92dea1f3
Datasheet source
- Official RECOM product series page: https://recom-power.com/en/rec-s-RxxP21509.html
- Official datasheet PDF: https://recom-power.com/pdf/Econoline/RxxP2xxyy.pdf
I updated the Flux component instance property
Datasheet URL on +VIN to the official PDF. The project-level Datasheet URL still appears as the RS page in project metadata; the available project-metadata edit tool does not expose Datasheet URL as an editable project-level field.Key datasheet specs
- Series: RxxP2xxyy Econoline, 2 W isolated DC/DC converter
- Package: SIP7, through-hole
- Dimensions: 19.5 mm × 9.8 mm × 12.5 mm
- Nominal input: 24 VDC
- Input range: 21.6 VDC to 26.4 VDC
- Outputs: +15 V / -9 V dual output
- Output currents: +67 mA / -111 mA
- Rated power: 2 W
- Typical efficiency: 86% per official RECOM selection table; RS page lists 70–82%, likely distributor-page/spec-table discrepancy or broader condition range.
- Isolation: 6.4 kVDC
- Operating temperature from RS page: -40 °C to +90 °C
Datasheet pinout vs schematic symbol
Table
| Datasheet pin | Function | Flux symbol terminal | Result |
|---|---|---|---|
| 1 | +Vin | +VIN, Pin Number 1 | Match |
| 2 | -Vin | -VIN, Pin Number 2 | Match |
| 5 | -Vout | -VOUT, Pin Number 5 | Match |
| 6 | Com | COM, Pin Number 6 | Match |
| 7 | +Vout | +VOUT, Pin Number 7 | Match |
Footprint review
Observed footprint contains five pad nodes named
+VIN, -VIN, -VOUT, COM, and +VOUT, matching the five used pins from the datasheet. The silkscreen/body outline in the layout view measures approximately 19.5 mm × 9.8 mm, consistent with the datasheet package dimensions. Pin numbering is represented through terminal properties rather than visible pad-number labels in the layout tree output.Mismatches / issues flagged
- Part Type is incorrect: Project metadata lists
Part Type: Resistors, but the part is an isolated DC/DC converter module / power supply. - Project-level Datasheet URL is not the official PDF: It points to an RS product page. The official RECOM PDF is
https://recom-power.com/pdf/Econoline/RxxP2xxyy.pdf. - Pin Type fields are generic: All terminal components have
Pin Type: Unspecified. For a published power module part, these should ideally be power input/output types where supported. - Pin descriptions are implicit: Terminal designators correctly describe pin functions, but no explicit
Pin Descriptionproperties were visible in the inspected terminal components. - Datasheet query tool timed out twice: Cross-check used web search/scrape results from official RECOM sources and the RS product page rather than internal datasheet extraction.
Verdict
The schematic symbol pin numbers and terminal names match the official datasheet pinout, and the footprint appears consistent with the SIP7 package and body dimensions. The main corrections needed are metadata hygiene: change Part Type away from
Resistors, set the project-level Datasheet URL to the official RECOM PDF if possible, and add explicit pin descriptions / electrical pin types for publication quality.
Welcome 👋
Flux accelerates your PCB design with AI.
Create your account to start using this component and bring your ideas to life.