Part Information Review and Validation
Thought for 7 mins 29 sec
I’m blocked from executing the requested review because this session has no remaining tool credits, so I can’t inspect the part properties, search for the official datasheet, update the Datasheet field, or cross-check the symbol/footprint pins directly.
Current known project context:
- Part/project: ERJ-P06F22R0V
- Description: Thick Film Resistors – SMD 0805, 22 Ω, 0.5 W, 1%, AEC-Q200
- Pad count: 2
What remains to be done once execution is available:
- Inspect the part’s existing metadata: MPN, package, pin count, description, properties, and Datasheet field.
- If the Datasheet property is empty, locate the official manufacturer datasheet for Panasonic ERJ-P06F22R0V and update the property.
- Verify schematic symbol:
- 2-pin resistor symbol
- Correct passive pin types
- No polarity
- Verify footprint:
- 0805 / metric 2012 package
- 2 pads
- Pad geometry suitable for a 0.5 W thick-film resistor
- Cross-check datasheet specs:
- Resistance: 22 Ω
- Tolerance: ±1%
- Power rating: 0.5 W
- Technology: thick film
- Automotive qualification: AEC-Q200
- Package: 0805
- Flag any mismatch between the datasheet, schematic symbol, footprint, and stored properties.
No project changes were made.
Edit datasheet field
Check from provided specs
Run review later
Inspect pad dimensions
To get started, talk to Flux or create a New Document.
