Part Review and Datasheet Update

Thought for 4 mins 59 sec
2/4 Remove or correct displaced footprint graphics and verify compact bounds
Thought for 6 sec
Reading layout details.
Reading layout details.
Reading schematic details.
Thought for 7 sec — Reviewing project details
Found 1 results for DRV8234RTER.
Thought for 7 sec
Reading DRV8234RTER Footprint Fix's report…
Thought for 11 sec — Considering verification needs
4/4 Independently verify final footprint, mapping, bounds, and metadata

Rebuild all 17 footprint pads to the specified RTE0016C geometry while preserving mapping and Pin 1 orientation

Remove or correct displaced footprint graphics and verify compact bounds

Keep exposed pad assigned to GND and change category to Motor Driver

Independently verify final footprint, mapping, bounds, and metadata

Thought for 5 sec
Awaiting 1 background task
"DRV8234RTER Verification" completed.

flux

Rebuilt and independently verified the DRV8234RTER footprint: 16 pads at 0.60 × 0.24 mm, 0.50 mm pitch, row centers at ±1.40 mm, and a centered 1.68 × 1.68 mm EP. Pin mapping, counterclockwise numbering, and Pin 1 orientation are preserved.
  • Displaced graphics/text were centered or disabled; rendered footprint bounds are now approximately 4.31 × 4.30 mm.
  • EP17 and GND7 are both classified as Ground.
  • Removed Logic/AND classification; set IC Type = Power Management and Role = Motor Driver because Motor Driver is not an available IC-type enum.
  • MPN and datasheet remain populated.
  • Independent verification: all acceptance items passed.
Sign up to send

Files

Pins

Symbol

Layout

3D View

No files yet