Part Cross-Check and Datasheet Update
Thought for 1 min 43 sec
I reviewed the current part data and found an official datasheet URL I can write into the part properties:
- Official datasheet: PDF
What I found
- MPN in project: KF301-2P
- Description in project: missing / incomplete
- Package/footprint asset: HANDSON_KF301-2P.kicad_mod
- 3D model asset: KF301-2P.step
- Schematic terminals present: 1, 2
Key specs from the datasheet
Table
| Field | Datasheet value |
|---|---|
| Series | KF301 Series |
| Positions | 2P |
| Pitch | 5.0 mm |
| Rated voltage | 300 V |
| Rated current | 16 A |
| Wire range | AWG 16-24 |
| Screw | M2.5 steel, zinc plated |
| Housing | PBT, UL94V-0 |
| Temperature range | -30 to +120 C |
| Max soldering | +150 C for 5 s |
| Description | PCB-to-wire screw terminal block, expandable series |
Cross-check summary
Table
| Area | Status | Notes |
|---|---|---|
| MPN | Good | Matches KF301-2P |
| Pole count | Good | Project is 2-position; datasheet supports 2P |
| Symbol pin count | Good | 1 and 2 match a 2-pin part |
| Pin numbering | Good | Symbol uses pins 1 and 2; datasheet text retrieved did not expose explicit numbering, so no contradiction found |
| Footprint pitch | Needs attention | Footprint pads are at -2.5 mm and +2.5 mm, so center-to-center pitch is 5.0 mm, which matches the datasheet |
| Footprint drill/pad sizes | Not fully verified | Current footprint uses 1.4 mm drill, 2.1 mm pad; the retrieved datasheet text did not expose recommended PCB hole/drill values |
| Description/property completeness | Mismatch | Several useful properties are missing from the part definition |
| Pin descriptions | Mismatch | I do not see terminal descriptions populated for 1 / 2 |
Flags
- Missing Datasheet property URL
- Missing richer part metadata such as description/package/spec properties
- Missing pin descriptions for 1 and 2
- Footprint hole geometry could not be fully verified from the retrieved datasheet text alone
I can update the part properties now, starting by setting the Datasheet property to that official PDF URL.
To get started, talk to Flux or create a New Document.
