Arduino Circuit Design
Make an arduino uno with two 16 channel microcontrollers connected and 100 kOhm resistors
6 days
0:51
Thinking deeply about your request.
Creating a plan outline.
Working on your request.
Clarifying project goals.
Your goal is a new controller board with two 16-channel devices and 100 kOhm resistors built around an Arduino-style main controller.
- I’ve created a plan to:
- Start a new editable design project
- Add the main controller, the two 16-channel devices, and the resistors
- Wire everything together
- Review it so it’s ready for layout
Click Start on the plan bar to begin.
Plan
- Establish a new design project inspired by the Arduino Uno published part that integrates two 16 channel microcontrollers and 100 kΩ resistors, ensuring clear functional and interfacing requirements from the outset.
#Implementation plan
- Define the project scope and starting framework
- Confirm that the project is a new design building upon the Arduino Uno concept without modifying the non-editable published part.
- Document the design's purpose to include integration of two 16 channel microcontrollers and the placement of 100 kΩ resistors.
- Clarify functional and interconnection requirements
- Capture the intended roles and interfacing strategies for each of the two 16 channel microcontrollers with the Arduino Uno base design.
- Define the purpose and connections of the 100 kΩ resistors within the system.
- Capture key system constraints and design preferences
- Document electrical constraints such as supply voltages, signal levels, and interfacing needs between devices.
- Identify physical constraints including board size, component packaging, and layout considerations.
- Define success criteria and deliverables
- Approve a schematic-level architecture that meets all requirements.
- Confirm that all system functionalities, resistor roles, and interconnections are clearly captured in the design brief.
#Success criteria
- A complete design brief that outlines how two 16 channel microcontrollers integrate with the Arduino Uno concept including the role of the 100 kΩ resistors.
- Confirmation of key project parameters (electrical, physical, interfacing) and success criteria for a complete first-pass design brief ready for subsequent implementation stages.
Use ATmega16s
Specify resistor placement
Add I2C connection
Need exact parts list
6 days
To get started, talk to Flux or create a New Document.
Welcome 👋
Flux accelerates your PCB design with AI.
Create your account to start using this component and bring your ideas to life.