Part Information Review
Thought for 1 sec
Blocked: I haven’t been able to perform the part audit yet in this session because execution is currently unavailable, so I could not inspect the project data, look up a datasheet URL, or verify symbol/footprint/pin metadata against the manufacturer document.
What remains to be done once execution is available:
- Read the existing part metadata: MPN, package, pin count, description, and custom properties.
- Check whether the Datasheet property is already populated.
- If missing, find the official manufacturer datasheet URL and populate the Datasheet field.
- Cross-check the symbol pinout, footprint pad count/pitch/orientation, and pin descriptions against the datasheet.
- Summarize key electrical/mechanical specs and flag any mismatches or missing data.
Given the project description, the part appears to be a Phoenix Contact PTSM 0,5/5-2,5-V SMD terminal block (5 positions, 2.5 mm pitch, 6 A, 160 V). The likely verification points will be:
- 5 electrical positions / 5 pads
- 2.5 mm pitch
- SMD linear pad geometry
- 90° wire entry orientation
- Package/body dimensions matching the tape-packaged variant
- Pin numbering/order matching the datasheet mechanical drawing
If you want, I can still help by giving you a manual verification checklist for this terminal block so you can update the project quickly yourself.
Manual checklist
Find datasheet URL
Inspect fields
Pin numbering
Update datasheet property
