docbrown

1. Determine the input signal characteristics, such as frequency range, amplitude, and signal type (e.g., current or voltage). This will help you select appropriate components for amplification and filtering.
2. Choose a suitable amplifier that provides enough amplification for your input signal (e.g., instrumentation amplifiers, operational amplifiers, or transimpedance amplifiers).
3. Design necessary filtering circuits. Depending on your application, you may need passive or active filters, such as high-pass, low-pass, band-pass, or notch filters.
4. Integrate the amplifier and filtering circuits into your current design, ensuring that you maintain proper circuit layout practices, such as grounding techniques, minimizing noise coupling, and maintaining signal integrity.

chaykak2

docbrown

1. Resolution: 16-bit
2. Channels: 4 differential input channels (can be used as single-ended as well)
3. Input voltage range: Input range up to the supply voltage (rail-to-rail)
4. Interface: I2C
5. Power supply: Operates between 2.0 V and 5.5 V

chaykak2

1. 8 bit
2. 2
3. 3.3V
4. SPI
5. 5V
6. IFE

docbrown

1. Resolution (e.g., 8-bit, 12-bit, 16-bit, or higher)
2. Number of channels (single or multi-channel)
3. Required input voltage range
4. Interface preferences (I2C, SPI, parallel, etc.)
5. Power supply requirements and constraints (voltage supply, power consumption)
6. Any additional features or requirements (e.g., integrated analog front-end or filtering)

chaykak2

docbrown

chaykak2

docbrown

1. Texas Instruments BQ24072: A single-cell, linear battery charger with thermal regulation, offering charge current programmability up to 1A, termination current programmability, and a wide input voltage range.
2. Texas Instruments BQ24232: A highly integrated single-cell lithium-ion/polymer battery charger with input current limit, thermal regulation, and voltage-based battery charging. It can deliver up to 1A of charge current with an input voltage range from 4.35V to 6.2V.
3. Microchip MCP73831: A popular linear charge management controller for single-cell lithium-ion and lithium-polymer batteries. It offers constant current, constant voltage (CC/CV) charging and a charge current of 500mA.

chaykak2

docbrown

1. Panasonic NCR18650GA: This is a popular 18650 battery with a capacity of 3500mAh and nominal voltage of 3.6V, showing a good balance between energy density and discharge rate.
2. Samsung INR18650-30Q: Another popular 18650 battery, it has a capacity of 3000mAh and nominal voltage of 3.6V, with a continuous discharge rating of 15A, making it suitable for high-drain applications.

chaykak2

docbrown

1. Pre-charging phase (Trickle charge): If the battery voltage is very low, a small constant current (usually around 10% of the rated current) is applied to gently charge the battery and avoid potential damage.
2. Constant current (CC) phase: In this phase, the charger supplies a constant current to the battery, typically around 1C or less, depending on the battery's specification. The battery voltage gradually increases during this phase. This phase continues until the battery reaches the specified charge voltage (usually 4.2 V per cell).
3. Constant voltage (CV) phase: Once the target charge voltage is reached, the charger maintains a constant voltage while progressively decreasing the charging current. This phase offers a balance between charging speed and battery health, preventing overcharging. The charging process is considered complete when the charging current drops to a predetermined termination level (typically around 3-10% of the rated capacity due to specific battery manufacturer recommendations).

chaykak2