Chat

Welcome to Flux

Treat Flux like your intern. Tell it what you'd like to build and it'll get to work. You can also ask it questions, brainstorm ideas, and teach it your preferences. Learn More

Explain project

Write a project description

Find schematic issues

Create a test plan

Simulate a circuit

Prepare for Manufacturing

Component Selection Workflow

New Subsystem Wizard

Ready.

Diseñar un circuito secuencial que encienda 4 leds en secuencia 1 Entrada para ...

cachas

@copilot Diseñar un circuito secuencial que encienda 4 leds en secuencia 1 Entrada para invertir ha secuencia

copilot

Claro, puedo ayudarte con eso. Diseñemos un circuito sencillo utilizando flip-flops y un inversor para realizar la tarea de secuenciar los LEDs y poder invertir la secuencia con una entrada.

Componentes necesarios:

4 LEDs
4 Resistores para los LEDs (por ejemplo, 220Ω)
4 Flip-Flops tipo D
Un inversor (por ejemplo, puerta NOT)
Un clock (generador de pulsos)
Un switch o botón para invertir la secuencia

Diagrama del circuito:

Conectar el clock al pin de clock (CLK) de todos los flip-flops.
Conectar la salida Q del primer flip-flop al D del siguiente flip-flop.
Conectar las Q’ (Q barra) a los LEDs a través de resistores.
Conectar la entrada de inversión al inversor.
Conectar las salidas del inversor a las entradas D de los flip-flops adecuadamente para invertir la secuencia.

Conexiones específicas: Flip-Flops:

D1: entrada primera salida
Q1: salida para LED1
Q1': entrada para D2 (sin invertir)
D2: entrada conectada a Q1'
Q2: salida para LED2
Q2': entrada para D3 (sin invertir)
D3: entrada conectada a Q2'
Q3: salida para LED3
Q3': entrada para D4 (sin invertir)
D4: entrada conectada a Q3'
Q4: salida para LED4

Clock:

Conectar el Clock a todos los CLK de los flip-flops.

Inversor:

Conectar el switch de inversión a la entrada del inversor.
Conectar la salida del inversor a los pines D de los flip-flops en lugar de conectar directamente Q’ de un flip-flop al siguiente flip-flop para invertir la secuencia.

LEDs:

Conectar un extremo de los LEDs a Q de cada flip-flop respectivamente a través de resistencias.
Conectar el otro extremo de los LEDs a GND.

Esquema de Conexiones:

Invertido OFF
- Conectar Q1' a D2, Q2' a D3, Q3' a D4.
Invertido ON
- Conectar la salida del inversor a las entradas D de los flip-flops.

En Flux, definiríamos los componentes y las conexiones de la siguiente manera:

Flip-Flops
- Conectar CLK: Clock a FF1:CLK, FF2:CLK, FF3:CLK, y FF4:CLK.
- Conectar Q1’ $\bar{Q}_1$ a LED1.
- Conectar Q2’ $\bar{Q}_2$ a LED2.
- Conectar Q3’ $\bar{Q}_3$ a LED3.
- Conectar Q4’ $\bar{Q}_4$ a LED4.
- Conectar Q1’ $\bar{Q}_1$ (sin invertir) a D2.
- Conectar Q2’ $\bar{Q}_2$ (sin invertir) a D3.
- Conectar Q3’ $\bar{Q}_3$ (sin invertir) a D4.
Inversor
- Conectar Switch de inversión a la entrada del inversor.
- Conectar la salida del inversor a los pines D de los flip-flops.

Proyecto en Flux

Estos son los designadores y conexiones básicas que tendrás que implementar. Asegúrate de ajustar los valores de componentes según tus necesidades específicas y verificar la secuencia con la simulación que te ofrece Flux.

Si necesitas un diagrama específico o una simulación, avísame y puedo proporcionarte más detalles o hacer una simulación básica aquí.

copilot

¡Claro! Vamos a diseñar un circuito secuencial para encender cuatro LEDs en secuencia, con la opción de invertir la secuencia usando una entrada de control.

Componentes Necesarios

4 LEDs
4 Resistores (220Ω - 470Ω)
4 Flip-Flops tipo D (74HC74)
1 Inversor (NOT Gate) (74HC04)
1 Generador de pulsos (Clock)
1 Interruptor (Switch) para la entrada de inversión

Conexiones

Vamos a conectar los componentes en la siguiente secuencia lógica.

Conexiones de Clock

Conecta el clock a los pines CLK de todos los flip-flops:

Conecta $\text{Clock:output}$ a $\text{FF1:CLK}$ , $\text{FF2:CLK}$ , $\text{FF3:CLK}$ , y $\text{FF4:CLK}$ .

Conexiones de LEDs y Resistencias

Conecta las Q de los flip-flops a los LEDs mediante resistencias:

Conecta $\text{FF1:Q}$ a $\text{R1:1}$ .
Conecta $\text{R1:2}$ a $\text{LED1:Anodo}$ .
Conecta $\text{LED1:Cátodo}$ a GND.

Repite lo mismo para los demás LEDs:

Conecta $\text{FF2:Q}$ a $\text{R2:1}$ .
Conecta $\text{R2:2}$ a $\text{LED2:Anodo}$ .
Conecta $\text{LED2:Cátodo}$ a GND.
Conecta $\text{FF3:Q}$ a $\text{R3:1}$ .
Conecta $\text{R3:2}$ a $\text{LED3:Anodo}$ .
Conecta $\text{LED3:Cátodo}$ a GND.
Conecta $\text{FF4:Q}$ a $\text{R4:1}$ .
Conecta $\text{R4:2}$ a $\text{LED4:Anodo}$ .
Conecta $\text{LED4:Cátodo}$ a GND.

Conexiones de Flip-Flops para secuencia normal

Conecta $\text{FF1:Q’}$ a $\text{FF2:D}$ .
Conecta $\text{FF2:Q’}$ a $\text{FF3:D}$ .
Conecta $\text{FF3:Q’}$ a $\text{FF4:D}$ .

Conexiones del Inversor para secuencia invertida

Conecta la salida del Interruptor (Switch) a la entrada del Inversor (74HC04).
Conecta la salida del inversor a las entradas D de los flip-flops para invertir la secuencia.
Conecta $\text{74HC04:Salida1}$ a $\text{FF2:D}$ .
Conecta $\text{74HC04:Salida2}$ a $\text{FF3:D}$ .
Conecta $\text{74HC04:Salida3}$ a $\text{FF4:D}$ .

Alimentación de flip-flops y componentes

Conecta Vcc y GND a los flip-flops y otros componentes:

Conecta $\text{74HC74:Vcc}$ a Vcc.
Conecta $\text{74HC74:GND}$ a GND.

Simulación en Flux

Para crear y verificar el diseño en Flux:

Abre Flux y empieza un nuevo proyecto.
Agrega los componentes necesarios desde la biblioteca.
Realiza las conexiones según el esquema descrito anteriormente.
Configura los valores de resistencias y otros ajustes según sea necesario.
Ejecuta la simulación para verificar el diseño.

Si tienes más preguntas o necesitas más detalles sobre cómo construir este proyecto en una plataforma de simulación como Flux, ¡avísame!

cachas

Me puedes armar todo con todo y conexiónes

explain this project.

cachas

Necesitó que me diseñes un circuito secuencial que encienda 4 leds en secuencia 1 Entrada para invertir la secuencia

cachas

@copilot explain this project.

copilot

Sure! Let me break down the elements of this project for you.

Overview

This project appears to be an initial setup for a simulator template for an LED part. It includes some basic parameters and components.

Project Properties

Designator Prefix,LED: 0
- This likely means that the prefix for LED components in this project will be "LED." The "0" might indicate the numbering start.
Forward Voltage,1.70: 1
- This indicates that the LED's forward voltage is $1.70,\text{V}$.
Manufacturer Name,: 2
- This section appears to be incomplete or a placeholder for the manufacturer's name.

Project Components

There are two components mentioned in the project:

Designator: A
- Pins: 1 - The component has one pin.
- Element Properties:
  - Pin Type: Unspecified
  - **Symbol Pin Position: $\text{[object Object]}$ - This looks like a placeholder or an error.
  - Pin Number: 2 - The actual pin number.
  - Designator Prefix: P - The prefix for this component's designator appears to be "P."
- Terminal Order: - Unspecified.
Designator: K
- Pins: 1 - The component has one pin.
- Element Properties:
  - Pin Type: Unspecified
  - **Symbol Pin Position: $\text{[object Object]}$ - This looks like a placeholder or an error.
  - Pin Number: 1 - The actual pin number.
  - Designator Prefix: P - The prefix for this component's designator appears to be "P."
- Terminal Order: - Unspecified.

Summary

Components A and K:
- These are likely placeholders for the anode (A) and cathode (K) terminals of the LED.
- The specific properties for pins and positions are not defined yet.
Electrical Connections: No connections have been made yet.

Next Steps

To complete this project:

Define and connect the anode and cathode of the LED.
Ensure the correct forward voltage is applied.
Complete or correct placeholders like $\text{[object Object]}$ .

Feel free to ask for help with any specific aspect, such as making electrical connections or defining properties!

Reviews

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
15.6k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
jharwinbarrozo
1.2M
875105359001
10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
jharwinbarrozo
1.1M

Project Name

[Example] LED Simulator Template 1d9e 63e7

Description

Simulator template for an LED part. Check out the Code editor for instructions!

Properties

Forward Voltage

1.70

Part Type

LED

Manufac…r Name

Manufac…Number

CTL1206FYW1T

Datasheet URL

page.venkel.com/hubfs/Resources/Datasheets/LEDs/CTL1206FYW1T.pdf

Designator Prefix

LED

Pricing & Availability

Distributor	Qty 1

Assets

led-on.svg

led-on

kicad_mod

LED_1206_3216Metric.kicad_mod

LED_1206_3216MetricFootprint

LED_1206_3216Metric.step

3D_LED_1206_3216Metric3D Model

led-off.svg

led-offDefault

Controls

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.

cachas / [Example] LED Simulator Template 1d9e 63e7

Schematic