Chat

Welcome to Flux

Treat Flux like your intern. Tell it what you'd like to build and it'll get to work. You can also ask it questions, brainstorm ideas, and teach it your preferences. Learn More

Explain project
Write a project description
Find schematic issues
Create a test plan
Simulate a circuit
Prepare for Manufacturing
Component Selection Workflow
New Subsystem Wizard
Sign up to send
i need a low pass filter
angelescalonabueno

angelescalonabueno

@copilot i need a low pass filter
2y

copilot

It seems like you've already set up the components for a 2-stage low-pass filter with a cutoff frequency of approximately 100Hz. The operational amplifiers (U1 and U2), resistors (R1 and R2), and capacitors (C3 and C2) can be used to make a second-order (2-stage) active low-pass filter using Sallen-Key topology.
Here are the connections:
  1. Connect R1:P1 to the signal input (this can be J1:TIP based on your netlist).
  2. Connect R1:P2 to U1:+IN and C3:P1.
  3. Connect C3:P2 to Ground (net 0 as per your netlist).
  4. Connect U1:-IN to R2:P1 and U1:OUT.
  5. Connect U1:V+ to your positive power supply (Net 2) and U1:V- to your negative power supply or Ground (Net 0).
  6. Connect R2:P2 to U2:+IN and C2:P1.
  7. Connect C2:P2 to Ground (Net 0).
  8. Connect U2:-IN to U2:OUT and take your filtered signal from U2:OUT.
  9. Connect U2:V+ to your positive power supply (Net 2) and U2:V- to your negative power supply or Ground (Net 0).
This will give you a 2-stage (second-order) low-pass filter with a cutoff frequency of approximately 100Hz. The exact cutoff frequency is determined by the resistors and capacitors:
fc=1/2∗pi∗sqrtR1∗R2∗C1∗C2f_c = 1/{2*pi*sqrt{R1*R2*C1*C2} }
where:
  • $R1$ and $R2$ are your resistor values (5 kOhm)
  • $C1$ and $C2$ are your capacitance values (318 nF)
Source(s):
https://docs.flux.ai/reference/expressions-overview https://docs.flux.ai/introduction
2y
Someone is typing...
3
R1
Resistance
5kΩ
R2
Resistance
5kΩ
C2
Capacitance
318nF
C3
Capacitance
318nF
U1
End of Life
U2
End of Life
X1

No results...

Learn to Add a Component

2-stage 100Hz lowpass filter

2-stage 100Hz lowpass filter thumbnail
Welcome to your new project. Imagine what you can build here.

Properties

Properties describe core aspects of the project.

Pricing & Availability

Distributor

Qty 1

Digi-Key

$2.16–$6.34

LCSC

$1.91–$2.64

Mouser

$6.14

Controls