Schematic for Unique Purple TV Glasses: Smart Wellhead Controller...

Smart Wellhead Controller Design

0:00

Connectors added:

Table

Name	URL	Quantity	Role	Role Details	Group
DC-002φ1.0环保	DC-002φ1.0环保	1	Connector	Solar panel input connector	PowerBlock
B2B-PH-K-S(LF)(SN)	B2B-PH-K-S(LF)(SN)	1	Connector	Li-ion battery connector with protection	PowerBlock

9 days

Added 2 components

0:05

Added 1x DC-002φ1.0环保 as DC1

Added 1x B2B-PH-K-S(LF)(SN) as J4

9 days

Made all new power net connections

1:27

Autopilot

Started: Make net connections: link solar panel connector → charger IC IN; battery connector → charger IC BAT; charger IC OUT → power-path switch input; power-path switch output → U3 VIN; connect input 10 µF capacitor across solar input net and GND; connect output 10 µF capacitor across U3 VIN and GND; preserve all existing nets without breaking them

9 days

Updated 4 nets

0:06

Connected DC1:5, U6:VCC, C8:P1

Connected J4:PIN1, U6:BAT, Q3:S

Connected C9:P1, Q3:D, U3:VIN

Connected C8:P2, C9:P2, GND:GND

9 days

Reviewing schematic completeness and messaging user...

1:06

Autopilot

Started: 5.1. Review schematic for completeness of the new charging stage and message the user any missing components or connections

9 days

Added missing power-block components

1:08

Autopilot

Started: Add any missing components necessary to meet functional goals (e.g., TVS diodes, reverse-polarity protection, indicator LEDs) and add them to the schematic

9 days

Added 2 components

0:09

Added 1x Generic Resistor as R8

Added 1x 150060VS55040 as LED2

9 days

Added missing charger-to-HT7333 net connections

1:08

Autopilot

Started: 5.3. Add net connections to ensure charger, battery, and HT7333 are fully connected

9 days

Updated 2 nets

0:05

Connected U6:VCC, DC1:5, L1:P1

Connected U6:COM, U3:VIN, Q3:D

9 days

Reviewed passives for voltage ratings

0:53

Autopilot

Started: Review all passives for voltage and capacitance ratings and adjust or replace as needed

9 days

Updated properties for 9 objects

0:07

Set C1's Voltage Rating to "10"

Set C2's Voltage Rating to "10"

Set C3's Voltage Rating to "10"

Set C4's Voltage Rating to "16"

Set C5's Voltage Rating to "16"

Set C6's Voltage Rating to "16"

Set C7's Voltage Rating to "16"

Set C8's Voltage Rating to "25"

Set C9's Voltage Rating to "10"

9 days

Reviewed active devices voltage headroom

0:44

Autopilot

Started: Review all active devices for voltage and headroom requirements and adjust or replace as needed

9 days

Updated properties for 2 objects

0:04

Set Q2's Drain to Source Voltage to "30"

Set Q3's Drain to Source Voltage to "30"

9 days

Updated placement-group tags and notes

0:54

Autopilot

Started: 6.1. Update placement-group property of all newly added power management components to "PowerBlock" and add component notes on logic-level P-MOS requirement and solar connector specs

9 days

Updated properties for 7 objects

0:12

Set U6's placement-group to "PowerBlock"

Set Q3's placement-group to "PowerBlock"

Set Q3's Role to "Switching"

Set Q3's Role Details to "Ideal-diode P-channel MOSFET for power-path switching between solar input and battery source; requires logic-level gate drive"

Set Q3's Transistor Type to "MOSFET"

Set J4's placement-group to "PowerBlock"

Set J4's Role to "Power Source"

Set J4's Role Details to "Battery connector interfacing Li-ion battery pack to charger and power-path circuitry"

Set DC1's Role to "Power Source"

Set DC1's Role Details to "Solar panel input connector; DC-002φ1.0 rated for outdoor solar PV use"

Set DC1's Connector Type to "Photovoltaic / Solar Connectors"

Set C9's placement-group to "PowerBlock"

Set C9's Role to "Power Filtering"

Set C9's Role Details to "Output bulk/decoupling capacitor on Net 1 at power-path output"

Set LED2's placement-group to "PowerBlock"

Set LED2's Role to "Indicator"

Set LED2's Role Details to "Power/status indicator LED associated with PowerBlock supply state"

Set R8's placement-group to "PowerBlock"

Set R8's Role to "Current Limiting"

Set R8's Role Details to "Series current-limiting resistor for PowerBlock status LED"

9 days

Running ERC checks for charger circuit...

0:18

Autopilot

Started: Run ERC checks to verify correct integration of the charger and power-path circuits

9 days

Fetching ERC review results...

0:30

Autopilot

Started: Fetch ERC review results and message user with any issues found in the charger and power-path circuits

9 days

Fetching DRC review results...

0:41

Autopilot

Started: Fetch DRC review results and message user with any footprint or routing rule violations

9 days

Needs more info.

Show Plan

Sign up to send

Reviews

Electrical Rule Checks

Missing Footprints

Reports parts that have no footprint.

Design Rule Checks

Overlapping Copper • 33

	Des	Net	Des	Net	...
	C8:P1	12V_INPUT	Trace bef9	Net 1
	C8:P1	12V_INPUT	Trace c62b	Net 1
	C2:P2	GND	Trace c97d	Net 1
	C5:P2	GND	Through-hole - 1	SENSOR_INT
	C5:P2	GND	Trace 4ae4	SENSOR_INT
	C8:P2	GND	Trace bef9	Net 1
	Q1:S	GND	Trace 83e3	I2C_SDA
	Q1:S	GND	Trace ff38	I2C_SDA
	Trace 2c35	I2C_SCL	U4:SDA	I2C_SDA
	Trace 12d7	Net 1	C1:P2	GND
	Trace 12d7	Net 1	C2:P2	GND
	Trace 8871	Net 1	LED2:A	None
	U3:VIN	Net 1	D1:I/O2	I2C_SCL
	Trace 21ee	PWM_CTRL	J3:Pin_1	ANALOG_IN
	Trace 0983	PWM_CTRL	U3:GND	GND
	Trace 0983	PWM_CTRL	U3:VIN	Net 1
	Trace 0983	PWM_CTRL	U3:VOUT	VDD3P3
	C5:P1	VDD3P3	Trace 4ae4	SENSOR_INT
	C6:P1	VDD3P3	U2:SI	SPI_MOSI
	Trace 0b9d	VDD3P3	U6:VCC	12V_INPUT
	Trace 0b9d	VDD3P3	U6:BAT	BATTERY
	Trace 0b9d	VDD3P3	R3:P1	None
	Trace 0b9d	VDD3P3	U6:CSP	None
	Trace 0b9d	VDD3P3	U6:DRV	None
	Trace 0b9d	VDD3P3	U6:MPPT	None
	J3:Pin_2	None	Trace bb72	I2C_SDA
	L1:P2	None	C1:P1	12V_INPUT
	R3:P1	None	Trace c185	VDD3P3
	R6:P1	None	Trace 5e14	Net 1
	U4:5V	None	Trace e08b	Net 1
	U5:G	None	Trace bb72	I2C_SDA
	U5:S	None	Trace bb72	I2C_SDA
	U6:VG	None	Trace e228	I2C_SCL

Invalid Layer

Reports nodes that are assigned to a layer that doesn't exist in the layout stackup.

Component Overrides

Reports components that have been modified using the "!important" flag.

Airwires • 46

	Designators	Net
	C1:P1, L1:P1	12V_INPUT
	C2:P1, C1:P1	12V_INPUT
	C3:P1, C1:P1	12V_INPUT
	C3:P1, C8:P1	12V_INPUT
	U6:VCC, C8:P1	12V_INPUT
	U6:VCC, DC1:5	12V_INPUT
	J3:Pin_1, Q2:S	ANALOG_IN
	J3:Pin_1, R5:P2	ANALOG_IN
	U1:IO34, R5:P2	ANALOG_IN
	J4:PIN1, U6:BAT	BATTERY
	U6:BAT, Q3:S	BATTERY
	C2:P2, C1:P2	GND
	C5:P2, Fill:Fill	GND
	C7:P2, Via-Island-4:Via-Island-4	GND
	U3:GND, D1:GND	GND
	Via-4-1:Via-4-1, U1:GND	GND
	Via-4-2:Via-4-2, C1:P2	GND
	R2:P1, U1:IO22	I2C_SCL
	U4:SCL, D1:I/O2	I2C_SCL
	U4:SCL, R2:P1	I2C_SCL
	R1:P1, U1:IO21	I2C_SDA
	U4:SDA, D1:I/O1	I2C_SDA
	U4:SDA, R1:P1	I2C_SDA
	D2:CH_1, D2:VDD	Net 1
	J1:Pin_1, C9:P1	Net 1
	J1:Pin_1, D2:CH_1	Net 1
	Q3:D, C9:P1	Net 1
	U3:VIN, Q2:D	Net 1
	U6:COM, Q3:D	Net 1
	U6:COM, U3:VIN	Net 1
	Q1:G, Q2:G	PWM_CTRL
	Q1:G, R5:P1	PWM_CTRL
	U1:IO26, R5:P1	PWM_CTRL
	RF1:1, U2:RF	RF_FEED
	U1:IO14, J2:Pin_1	SENSOR_INT
	U2:SCK, U1:IO18	SPI_CLK
	U2:NSS, U1:IO5	SPI_CS
	U2:SO, U1:IO19	SPI_MISO
	U2:SI, U1:IO23	SPI_MOSI
	C5:P1, D1:VCC	VDD3P3
	C5:P1, R2:P2	VDD3P3
	C6:P1, C4:P1	VDD3P3
	C6:P1, R1:P2	VDD3P3
	C6:P1, U2:VCC	VDD3P3
	U1:3V3, U3:VOUT	VDD3P3
	U2:VCC, R2:P2	VDD3P3

Deprecated Rules

Reports nodes that are using rules that are not supported anymore.

Layers with Multiple Fills

Reports layers that have multiple copper fills of different nets. Make sure the Connected Layers rule value of nets with fills is valid.

Floating Copper • 5

	Name
	Trace 1c10, Trace ae05, Trace 505c, Trace 7259, Trace c916, Trace 4b5e, Trace c4e2, Trace 813a, Trace 46c3, Trace 5ef0, Trace 5e23, Trace 223f, Trace f7cb
	Trace 3b18, Trace 4ae4, Through-hole - 1, Trace ba1a, Trace a0ff, Trace a7e4
	Trace 0983, Trace ee7d, Trace aa0b, Trace 62cc, Trace 2919, Trace e049, Trace fdcf, Trace 21ee, Trace 652e, Trace cfb5, Trace a2d3, Trace 9b15, Trace 6992, Trace dc56, Trace 305b, Trace db73, Trace 20ca, Trace e61b, Trace 50f5, Trace 7dd0
	Trace 00ec, Trace 6316, Trace 0c0e
	Trace 8482

Protected Intrusions

Reports intrusions from objects of other nets into polygons or fills that have the Protected layout rule applied.

Manufacturing

Manufacturer Part Number • 24

	Designator	MPN
	C1	None
	C2	None
	C3	None
	C4	None
	C5	None
	C6	None
	C7	None
	C8	None
	C9	None
	Hole1	None
	Hole2	None
	Hole3	None
	Hole4	None
	L1	None
	L2	None
	R1	None
	R2	None
	R3	None
	R4	None
	R5	None
	R6	None
	R7	None
	R8	None
	U4	None

Parts Available

Beta

Checks that all parts have a part number and are available from distributors.

System Checks

Auto-Layout

Beta

Reports issues with Auto-Layout if Flux cannot route something or must ignore a configuration.

Passive Components

Resistor Power Rating

Beta

Checks that the power traveling across a given resistor is under its rating with 50% headroom.

Pull Up/Pull Down Presence

Beta

Checks that IC pins that require pull up or pull down resistors have them.

Capacitor Voltage Rating

Beta

Checks that capacitors have appropriate voltage ratings to prevent overheating and ensure reliable circuit operation.

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor for rapid developing circuit topology. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0Ω 10Ω 100Ω 1.0kΩ 10kΩ 100kΩ 1.0MΩ 1.1Ω 11Ω 110Ω 1.1kΩ 11kΩ 110kΩ 1.1MΩ 1.2Ω 12Ω 120Ω 1.2kΩ 12kΩ 120kΩ 1.2MΩ 1.3Ω 13Ω 130Ω 1.3kΩ 13kΩ 130kΩ 1.3MΩ 1.5Ω 15Ω 150Ω 1.5kΩ 15kΩ 150kΩ 1.5MΩ 1.6Ω 16Ω 160Ω 1.6kΩ 16kΩ 160kΩ 1.6MΩ 1.8Ω 18Ω 180Ω 1.8KΩ 18kΩ 180kΩ 1.8MΩ 2.0Ω 20Ω 200Ω 2.0kΩ 20kΩ 200kΩ 2.0MΩ 2.2Ω 22Ω 220Ω 2.2kΩ 22kΩ 220kΩ 2.2MΩ 2.4Ω 24Ω 240Ω 2.4kΩ 24kΩ 240kΩ 2.4MΩ 2.7Ω 27Ω 270Ω 2.7kΩ 27kΩ 270kΩ 2.7MΩ 3.0Ω 30Ω 300Ω 3.0KΩ 30KΩ 300KΩ 3.0MΩ 3.3Ω 33Ω 330Ω 3.3kΩ 33kΩ 330kΩ 3.3MΩ 3.6Ω 36Ω 360Ω 3.6kΩ 36kΩ 360kΩ 3.6MΩ 3.9Ω 39Ω 390Ω 3.9kΩ 39kΩ 390kΩ 3.9MΩ 4.3Ω 43Ω 430Ω 4.3kΩ 43KΩ 430KΩ 4.3MΩ 4.7Ω 47Ω 470Ω 4.7kΩ 47kΩ 470kΩ 4.7MΩ 5.1Ω 51Ω 510Ω 5.1kΩ 51kΩ 510kΩ 5.1MΩ 5.6Ω 56Ω 560Ω 5.6kΩ 56kΩ 560kΩ 5.6MΩ 6.2Ω 62Ω 620Ω 6.2kΩ 62KΩ 620KΩ 6.2MΩ 6.8Ω 68Ω 680Ω 6.8kΩ 68kΩ 680kΩ 6.8MΩ 7.5Ω 75Ω 750Ω 7.5kΩ 75kΩ 750kΩ 7.5MΩ 8.2Ω 82Ω 820Ω 8.2kΩ 82kΩ 820kΩ 8.2MΩ 9.1Ω 91Ω 910Ω 9.1kΩ 91kΩ 910kΩ 9.1MΩ #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF 10pF 100pF 1000pF 0.01uF 0.1uF 1.0uF 10uF 100uF 1000uF 10,000uF 1.1pF 11pF 110pF 1100pF 1.2pF 12pF 120pF 1200pF 1.3pF 13pF 130pF 1300pF 1.5pF 15pF 150pF 1500pF 0.015uF 0.15uF 1.5uF 15uF 150uF 1500uF 1.6pF 16pF 160pF 1600pF 1.8pF 18pF 180pF 1800pF 2.0pF 20pF 200pF 2000pF 2.2pF 22pF 20pF 2200pF 0.022uF 0.22uF 2.2uF 22uF 220uF 2200uF 2.4pF 24pF 240pF 2400pF 2.7pF 27pF 270pF 2700pF 3.0pF 30pF 300pF 3000pF 3.3pF 33pF 330pF 3300pF 0.033uF 0.33uF 3.3uF 33uF 330uF 3300uF 3.6pF 36pF 360pF 3600pF 3.9pF 39pF 390pF 3900pF 4.3pF 43pF 430pF 4300pF 4.7pF 47pF 470pF 4700pF 0.047uF 0.47uF 4.7uF 47uF 470uF 4700uF 5.1pF 51pF 510pF 5100pF 5.6pF 56pF 560pF 5600pF 6.2pF 62pF 620pF 6200pF 6.8pF 68pF 680pF 6800pF 0.068uF 0.68uF 6.8uF 68uF 680uF 6800uF 7.5pF 75pF 750pF 7500pF 8.2pF 82pF 820pF 8200pF 9.1pF 91pF 910pF 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor for rapid developing circuit topology. *You can now change the footprint and 3D model at the top level anytime you want. This is the power of #generics
jharwinbarrozo
15.1k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
jharwinbarrozo
1.2M
875105359001
10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
jharwinbarrozo
1.1M

Inspect

Unique Purple TV Glasses

Unique Purple TV Glasses

Controls

Properties

Net Class Power

Controlled Impedance

Ω

System Architecture

Controlled Impedance Tolerance

%

Net Class Signal

Availability & Pricing

Distributor		Qty 1
	Arrow	$4.03–$7.56
	Digi-Key	$6.29–$17.20
	LCSC	$17.84–$18.40
	Mouser	$9.44
	TME	$15.17
	Verical	$4.26–$15.21

Assets

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.