5V to 3.3V Regulator Datasheet
0:55
Table
| Item | Part/Component | Connection/Note |
|---|---|---|
| Input Connector | 2-Pin Header (J1) | One pin provides 5V; the other provides GND |
| Input Indicator LED | Green LED (LED1) | Connect from 5V (J1) through series resistor [R1] to GND to indicate 5V presence |
| Input Series Resistor | 330Ω Resistor (R1) | In series with LED1 (suggested value: 330Ω; adjust as needed) |
| Voltage Regulator | MCP1700-3302E/TO (U1) | IN pin connected to 5V (J1); GND to common ground; OUT supplies regulated 3.3V with inherent ~200mA current limiting |
| Input Decoupling Capacitor | C1 (~10µF recommended) | Connect between U1 IN and GND to stabilize the 5V input |
| Output Decoupling Capacitor | C2 (~10µF recommended) | Place between U1 OUT and GND as per the regulator's datasheet |
| Output Indicator LED | Green LED (LED2) | Connect from 3.3V (U1 OUT) through series resistor [R2] to GND to indicate the regulated output |
| Output Series Resistor | 330Ω Resistor (R2) | Series resistor for LED2 (suggested value: 330Ω) |
| Output Connector | 2-Pin Header (J2) | One pin connected to 3.3V (U1 OUT) and the other to GND to deliver the regulated output |
Ready.
Reviews
Properties
Properties describe core aspects of the project.
Pricing & Availability
Distributor | Qty 1 |
|---|
Assets
No assets added.
Controls
Welcome 👋
Flux helps you build PCBs faster with an AI teammate!
Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.