Circuito de Sensor de Vibración

Thought for 1 min 5 sec

Aquí te propongo una versión mejorada de las conexiones, donde se agregan nombres a los nets y se organiza el cableado para facilitar la revisión y futuras modificaciones:

Mejoras en el Cableado del Esquemático

Sensor de Vibración U1
- Pin P1: Conéctalo directamente a la entrada digital D2 del U2. Renombra este net como "Vibracion_In" para identificar que proviene del sensor.
- Pin P2: Conéctalo directamente a Ground.
LED D1
- Utiliza un resistor de 220 Ω (por ejemplo, R1) en serie con el LED para limitar la corriente.
- Conecta el extremo libre del resistor a la salida digital D13 del U2. Puedes nombrar este net como "LED_Control".
- Conecta el pin A (ánodo) del LED a la rama del resistor y el pin K (cátodo) del LED a Ground.
Buzzer BZ1
- Conecta el pin + del buzzer, a través de un resistor en serie (puedes usar un resistor de entre 100 Ω y 220 Ω; por ejemplo, añade un R3), a la salida digital D8 del U2. Nombra este net como "Buzzer_Control".
- Conecta el pin - del buzzer directamente a Ground.
Conexiones de Tierra (GND)
- Asegúrate de que todos los componentes que requieren conexión a tierra (sensor, LED y buzzer) estén conectados a Ground mediante un net común.
Nomenclatura y Organización del Cableado
- Agrega nombres a los nets para una mejor identificación:
  - El net entre el sensor (pin P1) y D2: Vibracion_In.
  - El net entre D13 y el resistor que alimenta el LED: LED_Control.
  - El net entre D8 y el resistor que alimenta el buzzer: Buzzer_Control.

Resumen de Conexiones Mejoradas

Table

Net/ Línea	Conexiones Detalladas
Vibracion_In	- U1 Pin P1 → U2 D2
GND (Tierra)	- U1 Pin P2- D1 Pin K- BZ1 Pin -
LED_Control	- U2 D13 → R1 → D1 Pin A
Buzzer_Control	- U2 D8 → (a través de R3) → BZ1 Pin +

Estas mejoras organizan el cableado usando nets nombrados, lo cual facilita la depuración y futuras modificaciones en el esquemático. Puedes hacer clic en “Apply changes” para aplicar estas conexiones mejoradas a tu proyecto. Si requieres alguna modificación adicional o tienes alguna duda, ¡avísame!

Wire sensor, LED, buzzer

// Pines de conexión
const int sensorVibracionPin = 2;   // Pin digital para el sensor de vibración
const int ledPin = 13;              // Pin para el LED (puedes cambiarlo)
const int buzzerPin = 8;            // Pin para el buzzer
// Variables
int estadoSensor = 0;               // Para leer el estado del sensor
void setup() {
    // Inicializar pines
    pinMode(ledPin, OUTPUT);          // Configurar LED como salida
    pinMode(buzzerPin, OUTPUT);       // Configurar buzzer como salida
    pinMode(sensorVibracionPin, INPUT); // Configurar sensor como entrada
    // Iniciar comunicación serial (opcional, para depuración)
    Serial.begin(9600);
}
void loop() {
    // Leer el estado del sensor
    estadoSensor = digitalRead(sensorVibracionPin);

Line: 2:7: Variable 'int' implicitly has an 'any' type, but a better type may be inferred from usage.Line: 3:7: Variable 'int' implicitly has an 'any' type, but a better type may be inferred from usage.Line: 4:7: Variable 'int' implicitly has an 'any' type, but a better type may be inferred from usage.Line: 2:7: Cannot redeclare block-scoped variable 'int'.Line: 3:7: Cannot redeclare block-scoped variable 'int'.Line: 2:7: Cannot redeclare block-scoped variable 'int'.Line: 4:7: Cannot redeclare block-scoped variable 'int'.Line: 7:5: Cannot find name 'estadoSensor'.Line: 9:6: Cannot find name 'setup'.Line: 11:5: Cannot find name 'pinMode'.Line: 11:21: Cannot find name 'OUTPUT'.Line: 12:5: Cannot find name 'pinMode'.Line: 12:24: Cannot find name 'OUTPUT'.Line: 13:5: Cannot find name 'pinMode'.Line: 13:33: Cannot find name 'INPUT'.Line: 16:5: Cannot find name 'Serial'.Line: 19:6: Cannot find name 'loop'.Line: 21:5: Cannot find name 'estadoSensor'.Line: 21:20: Cannot find name 'digitalRead'.Line: 24:9: Cannot find name 'estadoSensor'.Line: 24:25: Cannot find name 'HIGH'.Line: 26:9: Cannot find name 'digitalWrite'.Line: 26:30: Cannot find name 'HIGH'.Line: 27:9: Cannot find name 'tone'.Line: 30:9: Cannot find name 'Serial'.Line: 33:9: Cannot find name 'delay'.Line: 36:9: Cannot find name 'digitalWrite'.Line: 36:30: Cannot find name 'LOW'.Line: 37:9: Cannot find name 'noTone'.Line: 2:11: ',' expected.Line: 3:11: ',' expected.Line: 4:11: ',' expected.Line: 7:1: Unexpected keyword or identifier.Line: 9:14: ';' expected.Line: 19:13: ';' expected.

Reviews

Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
16.2k
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
RMCF0805JT47K0
General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
jharwinbarrozo
1.2M
875105359001
10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
jharwinbarrozo
1.1M
1070TR
Battery Holder (Open) Coin, 20.0mm 1 Cell SMD (SMT) Tab bate or batt #forLedBlink
jharwinbarrozo
700.5k

Project Name

Technical Amber Hoverboard

Description

Welcome to your new project. Imagine what you can build here.

Properties

Properties describe core aspects of the project.

Pricing & Availability

Distributor	Qty 1
LCSC	$0.07

Controls

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.

artiiiiiiiii / Technical Amber Hoverboard

Code