Power Section Design Update
Thought for 6 sec
To duplicate the project in Flux:
- Open the current project.
- Click the project/menu controls near the project name.
- Choose Fork or Duplicate.
- Create the first copy and name it: GLECS HV Board.
- Go back to the original project and duplicate/fork again.
- Name the second copy: GLECS Logic Board.
Keep the original untouched as your master reference.
After both copies exist, the split workflow is:
- In GLECS HV Board, keep HV parts + J_LINK and remove/exclude logic parts.
- In GLECS Logic Board, keep logic parts + matching J_LINK and remove/exclude HV parts.
- Verify J_LINK pinout matches exactly in both projects.
Duplicate this project twice, keeping the original intact.
Name the first copy "GLECS HV Board" and the second copy
"GLECS Logic Board". Confirm when both copies exist.
Worked for 1 min 58 sec
Cloned 2 projects
GLECS HV Board
Power-section schematic for a 12V DC input generating +4V for a 4G module, +5V, and +3V3 rails with input TVS protection and regulator thermal notes.
GLECS Logic Board
Power-section schematic for a 12V DC input generating +4V for a 4G module, +5V, and +3V3 rails with input TVS protection and regulator thermal notes.
Both copies now exist, and the original project was left intact.
- GLECS HV Board: /ddsdasxdas/glecs-hv-board
- GLECS Logic Board: /ddsdasxdas/glecs-logic-board
Split both boards
Prepare HV board
Prepare logic board
Create split table
Verify J_LINK contract
