Part Review and Datasheet Update
Thought for 6 sec
I’ll update each terminal’s Pin Type and Pin Description to match the ST datasheet, including the VCC TAB/exposed pad description.
Worked for 19 sec
Flux flagged two non-standard pin type labels, so I’m normalizing them to the supported equivalents: Ground, Power In, and Open Collector for open-drain diagnostics.
Worked for 22 sec
Updated and verified the VNI2140J terminal metadata against the ST datasheet.
What changed:
- Inputs set to
Input - Outputs set to
Output - Diagnostics set to
Open Collectorwith open-drain descriptions - VCC and TAB set to
Power In - GND set to
Ground - NC set to
Not Connected - Added datasheet-based descriptions for all 13 terminals
Open item:
VCC_3still uses Pin Number13; datasheet calls this connectionTAB. I left numbering unchanged because you only asked for pin types/descriptions.
Fix TAB, review, docs
Fix TAB labeling
Run ERC DRC
Create verification note
Check BOM metadata
