I’ll inspect the part metadata, look for any existing datasheet link, source the official datasheet if needed, then compare symbol pins, footprint pads, and descriptions against it.

Completed the part review and created a detailed report: USB4960-00-C Part Verification.

No pin-number/signal mismatches were found. Main flags: terminal pin types/descriptions are incomplete, the datasheet URL is distributor-hosted instead of direct GCT-hosted, and footprint pad geometry could not be fully verified from the exposed layout data.

I’ll update each terminal with the datasheet signal description and appropriate electrical pin type, then re-read the schematic to verify the metadata was applied.

Terminal metadata is updated; I’m verifying the pin types and descriptions now.

Updated all 20 terminals with datasheet-derived Pin Type and Pin Description metadata.

Verification passed: all terminal descriptions and pin types are now present in the schematic.