Part Review and Datasheet Update
Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.
Thought for 6 sec
I’ll review the part metadata, look for an official datasheet if needed, update the Datasheet property, then verify symbol/footprint/pins against the datasheet and summarize any mismatches.
Worked for 8 mins 4 sec
Completed the TEN_30-2412WIN part review and added the official TRACO Power datasheet URL: https://www.tracopower.com/products/ten30win.pdf.
No functional pinout mismatch was found: the 6 terminals match the single-output TEN 30-2412WIN datasheet mapping, and the footprint body outline matches the 2" × 1" module package. I created the detailed review here: Part Review: TEN_30-2412WIN.
Fix docs and verify
Add pin descriptions
Update part description
Run ERC/DRC
Verify footprint dimensions
Refine this doc
Ask about this doc
Part Review: TEN_30-2412WIN
Reviewed project information
- Project/part name: TEN_30-2412WIN
- Manufacturer Part Number: TEN_30-2412WIN
- Manufacturer: TRACO Power / TRACO Electronic AG
- Part type: isolated DC/DC converter module
- Designator prefix: PS
- Current description: February 2, 2021 Manufacturer Recommendations, 10.7 mm, Traco Power
- Pads / terminals in project: 6
- Datasheet URL set during review: https://www.tracopower.com/products/ten30win.pdf
Official datasheet evidence
Official TRACO Power TEN 30WIN series datasheet found at:
https://www.tracopower.com/products/ten30win.pdf
Supplementary distributor references found for the same MPN/specs include DigiKey, Arrow, TME, and TRC Electronics mirrors. Primary reference for validation is the TRACO PDF.
Key specifications for TEN 30-2412WIN
Table
| Parameter | Value |
|---|---|
| Series | TEN 30WIN |
| Function | 30 W isolated DC/DC converter |
| Input voltage | 9–36 VDC, nominal 24 VDC |
| Output voltage | 12 VDC single output |
| Max output current | 2.5 A |
| Output power | 30 W |
| Typical efficiency | ~89% |
| Isolation | 1600 VDC per TRACO datasheet; some distributor summaries list 1.5 kV |
| Package | 2 in × 1 in shielded metal through-hole module, approx. 0.4 in / 10.7 mm height |
| Operating temperature | −40 °C to +75 °C with derating |
| Features | Remote on/off, output trim, adjustable output voltage |
Datasheet pinout cross-check
For the single-output TEN 30-2412WIN, the TEN 30WIN datasheet pinout is:
Table
| Pin | Datasheet function | Project terminal | Project pin type | Result |
|---|---|---|---|---|
| 1 | +Vin / Vcc | +VIN(VCC) | Input | Match |
| 2 | −Vin / GND | -VIN(GND) | Input | Match |
| 3 | Remote On/Off | REMOTE_ON/OFF | Input | Match |
| 4 | +Vout 1 | +VOUT1 | Output | Match |
| 5 | −Vout 1 | -VOUT1 | Output | Match |
| 6 | Trim | TRIM | Input | Match |
Notes:
- The project correctly uses the 6-pin single-output mapping. The datasheet also contains mappings for dual/triple-output variants; those do not apply to TEN 30-2412WIN.
- Pin 7 is only relevant to triple-output variants and is not expected here.
Symbol review
- Symbol terminal count: 6 terminals.
- Left side: input/control terminals (+VIN, -VIN, REMOTE_ON/OFF, TRIM).
- Right side: output terminals (+VOUT1, -VOUT1).
- Pin numbers match the datasheet for the single-output variant.
- Pin directions are reasonable for a converter symbol: input/control pins as Input, output pins as Output.
Footprint review
- Footprint terminal count: 6 pads, matching the single-output datasheet pin count.
- Silkscreen/body outline observed at approximately 50.8 mm × 25.4 mm, matching the 2 in × 1 in module package.
- Through-hole module classification is expected from the datasheet. The footprint appears to represent a 2×1 in module body.
Flagged mismatches / issues
- No functional pin description properties were present beyond terminal designators, pin number, and pin type. The terminal names themselves match the datasheet, but explicit
Pin Descriptionproperties are absent. - The datasheet property was missing before review and has now been added as
Datasheet URL= https://www.tracopower.com/products/ten30win.pdf. - The stored description references a February 2, 2021 recommendation, while the web result surfaced a newer official TRACO PDF revision/date. This is not a symbol/footprint mismatch, but the description may be stale.
- The layout inspection did not expose detailed per-pad coordinates in the tree view, so I could confirm pad count and body outline, but not independently verify every hole coordinate/pitch from tool output.
Overall conclusion
The schematic symbol pin numbers, pin names, pin directions, and 6-pad footprint are consistent with the official TRACO Power TEN 30WIN datasheet for TEN 30-2412WIN. No functional pinout mismatch was found. The main cleanup opportunities are adding explicit pin descriptions and updating the part description to reflect the latest official datasheet revision/spec summary.
Welcome 👋
Flux accelerates your PCB design with AI.
Create your account to start using this component and bring your ideas to life.