Pin Function Grouping
Worked for 3 mins 39 sec
Done — I simplified the functional groups to general names like
PA, PB, VDD, VSS, VCAP, Reset, Boot, etc., and set every pin’s Section to exactly match its Pin Group.Open items:
- None.
Suggested next steps:
- Review the symbol grouping visually.
- Add pin descriptions or alternate-function metadata if needed.
Thought for 10 sec
I’ll generalize the pin metadata further: GPIO ports will become
GPIO, supplies/grounds will become broad Power/Ground/Analog, and each pin’s Section will match its Pin Group.Worked for 4 mins 13 sec
Done — I generalized the groups further: all port pins are now
GPIO, supplies/regulator pins are Power, grounds are Ground, VREF+ is Analog, and reset/boot are Control. Each pin’s Section matches its Pin Group.Open items:
- None.
Suggested next steps:
- Visually review the symbol grouping.
- Add detailed pin descriptions separately if you still want per-pin specificity without granular groups.
Review, document, metadata
Run symbol review
Add pin descriptions
Document grouping scheme
Check footprint mapping
