Part Data Review and Update

adrian95

adrian95

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

flux

I’ll inspect the part metadata, look for an official datasheet if needed, then compare the symbol, footprint, and pin descriptions against the manufacturer data.

flux

Completed the part review and saved the detailed findings in Part Review: SM14B-SHLS-TF.
The part broadly matches the JST datasheet: 14 circuits, 1.00 mm pitch, SMT right-angle SHL header, 16 total pads including two solder tabs, and footprint outline consistent with the 16.8 mm datasheet width. Main flagged issues: terminal pin descriptions are missing, all pin types are Unspecified, and the Datasheet URL is populated with an uploaded PDF rather than the direct official JST URL.
Fix metadata and verify
Fix pin descriptions
Use official datasheet
Verify pad dimensions
Run review checks
Sign up to send

Refine this doc
Ask about this doc
Part Review: SM14B-SHLS-TF
Reviewed Part Information
The Datasheet URL property was already populated, so no property update was required under the requested rule.
Datasheet Key Specs
Source: JST SHL Connector datasheet, English PDF.
  • Series: SHL connector
  • Connector family: 1.0 mm pitch wire-to-board connector, crimp style / mating style
  • Header type: SMT side-entry / right-angle header, normal type
  • No. of circuits: 14
  • Pitch: 1.00 mm, PCB pattern pitch tolerance ±0.05 mm, non-accumulating
  • Current rating: 1.0 A AC/DC using AWG #28 wire
  • Voltage rating: 50 V AC/DC
  • Temperature range: -25 °C to +85 °C, including temperature rise under current
  • Contact resistance: 20 mΩ max initial; 40 mΩ max after environmental tests
  • Insulation resistance: 100 MΩ min
  • Withstanding voltage: 500 VAC for 1 minute, no breakdown/flashover
  • Applicable wire range: AWG #32 to AWG #28; insulation OD Ø0.4 mm to Ø0.8 mm
  • Quantity/reel: 4,500
  • Dimensions for SM14B-SHLS-TF: A = 13.0 mm, B = 16.8 mm
  • Materials/finish: Base contact phosphor bronze copper-undercoated tin-plated; wafer PA UL94V-0 natural ivory; solder tab brass copper-undercoated tin-plated
  • Compliance/standards noted: RoHS2 compliant; recognized E60389
Schematic Symbol Cross-Check
Observed symbol contents:
  • 16 terminal objects total.
  • Circuit terminals numbered 1 through 14 are present.
  • Two mechanical / solder tab terminals are present as MP_1 and MP_2 with pin numbers 15 and 16.
  • Symbol pin order is sequential for contacts 1–14, with mounting pads separated on the opposite side.
  • Terminal Pin Type is set to Unspecified for all pins.
  • No terminal-level Pin Description properties were found.
Assessment:
  • Pin count / terminal count: Matches the expected practical representation: 14 electrical circuits plus 2 solder tabs / mounting pads = 16 PCB pads.
  • Circuit numbering: Matches the datasheet’s 14-circuit header concept and No. 1 circuit marking.
  • Pin descriptions: Incomplete. Contacts 1–14 should be described as electrical contact/circuit pins, and MP_1/MP_2 should be described as solder tab / mechanical mounting pads.
  • Pin type: Unspecified is acceptable for passive connector terminals, but more explicit terminal descriptions would improve reviewability.
Footprint Cross-Check
Observed footprint/layout contents:
  • 16 pad nodes are present: pads 1–14 plus MP_1 and MP_2.
  • Silkscreen/body outline spans approximately 16.8 mm wide, consistent with the datasheet B dimension for the 14-circuit normal type.
  • The footprint includes a No. 1 indicator near the left side of the connector outline.
  • The footprint includes board-side silkscreen/body geometry consistent with a right-angle side-entry header.
Assessment:
  • Pad count: Matches expected 14 signal contacts + 2 solder tabs.
  • Overall width: Appears consistent with datasheet B = 16.8 mm.
  • Pin 1 marking: Present.
  • Right-angle/side-entry outline: Present.
  • Limitations: The available layout inspection did not expose detailed pad dimensions/centers for each pad, so I could not numerically verify every contact pad and solder-tab land dimension against the recommended PCB pattern. The visible outline and pad count are consistent.
Mismatches / Issues Flagged
  1. Missing pin descriptions — all terminal descriptions are blank/not present. Recommended descriptions:
    • Pins 1–14: Circuit contact 1 … Circuit contact 14, or equivalent.
    • MP_1/MP_2: Solder tab / mechanical mounting pad.
  2. Terminal pin types are all Unspecified — not necessarily wrong for a connector, but review quality would improve if contacts are marked passive/unspecified consistently and mounting tabs are described as mechanical/solder tabs.
  3. Datasheet property is populated with an uploaded storage URL, not the official JST URL — this satisfies “datasheet URL is set,” but if the goal is to keep the official manufacturer URL directly on the part, update it to https://www.jst-mfg.com/product/pdf/eng/eSHL.pdf.
  4. No BOM item shown — expected for a published part project composed of terminal primitives, not a board-level assembly issue.
  5. Part Type uses Connectors plural — acceptable semantically, though some property systems prefer singular Connector.
Conclusion
The part broadly matches the JST SM14B-SHLS-TF datasheet: manufacturer/MPN, 14-circuit 1.00 mm SMT right-angle SHL header description, 16 total pads including solder tabs, and approximate footprint body width are consistent. The main cleanup item is metadata quality: add terminal pin descriptions and optionally replace the Datasheet URL with the official JST PDF URL.

  • Reviewed Part Information

  • Datasheet Key Specs

  • Schematic Symbol Cross-Check

  • Footprint Cross-Check

  • Mismatches / Issues Flagged

  • Conclusion

Documents

Assets

SM14B-SHLS-TF

SM14BSHLSTF.kicad_modFootprint

SM14B-SHLS-TF

SM14B-SHLS-TF Symbol.svgDefault
SM14B-SHLS-TF

SM14B-SHLS-TF

SM14B-SHLS-TF.stp3D Model
SM14B-SHLS-TF-thumb.png

SM14B-SHLS-TF-thumb.png

SM14B-SHLS-TF-thumbThumbnail

SM14B-SHLS-TF

SM14B-SHLS-TF thumbnail
Connector Header Surface Mount, Right Angle 14 position 0.039" (1.00mm)

Properties

SM14B-SHLS-TF

JST

Connector

jst-mfg.com/product/pdf/eng/eSHL.pdf

J

Surface Mount

parametric-v1

creativecommons.org/licenses/by/4.0/

Pricing & Availability

No results found.

Controls