Part Data Review and Validation
Table
| Field | Value |
|---|---|
| Part | SARA-R510M8S-00B |
| Datasheet | https://www.u-blox.com/en/docs/UBX-19016638 |
| Document number | UBX-19016638 |
| Revision | R20 |
| Date | 20-Oct-2023 |
| Family | SARA-R5 series |
| Function | LTE-M / NB-IoT module based on UBX-R5 chipset |
Table
| Category | Details |
|---|---|
| Cellular | LTE Cat M1 / NB2 dual-mode |
| GNSS | GNSS support on selected variants |
| Security | Hardware root of trust, secure boot, secure firmware update, secure cloud support |
| Protocols | TCP/UDP, MQTT / MQTT-SN, HTTP / HTTPS, FTP / FTPS, CoAP, TLS / DTLS, LwM2M |
| Power | Ultra-low power, deep sleep / PSM support, last gasp |
| RF features | Antenna dynamic tuning, jamming detection |
| Other | uFOTA, CellTime, industrial temperature range |
Table
Table
| Parameter | Value |
|---|---|
| VCC operating range | 3.2 V to 4.2 V |
| V_INT output voltage | 1.8 V |
| V_INT output current capability | 70 mA |
| I2C domain supply | 1.8 V |
| I2C low input | -0.3 V to 0.5 V |
| I2C high input | 1.3 V to 2.1 V |
| I2C low output | 0.0 V typ |
| I2C pull-up input current | -450 µA typ |
| SIM supply | 1.8 V or 3.0 V |
| SIM high input | 0.6 × VSIM to VSIM + 0.3 V |
| SIM low input | -0.3 V to 0.2 × VSIM |
| SIM_IO internal pull-up | 4.7 kΩ typ |
| SIM_CLK frequency | 3.13 MHz typ |
Table
| Mode | Typical |
|---|---|
| PSM current | 62 µA |
| eDRX current | 180 µA |
| LTE Cat M1 connected mode | 135 mA at 23 dBm |
| GNSS startup | 100 mA |
| GNSS continuous tracking | 33 mA GPS, 41 mA GPS + GLONASS |
Table
| Parameter | Value |
|---|---|
| Body length | 26.0 mm ±0.20 mm |
| Body width | 16.0 mm ±0.20 mm |
| Thickness | 2.2 mm +0.25/-0.15 mm |
| Weight | < 3 g |
| Lateral pad pitch | 1.1 mm ±0.05 mm |
| Lateral pad size | 0.8 mm x 1.5 mm |
| Central pad size | 1.1 mm x 1.1 mm |
| Land pattern guidance | Referenced to UBX-14001652 Package Information Guide |
Table
| Pins / functions | Datasheet note |
|---|---|
| UART control lines | DSR, RI, DCD, DTR, RTS, CTS are not supported |
| I2S on 00B version | I2S_WA, I2S_TXD, I2S_CLK, I2S_RXD are not supported on the 00B version |
| SDIO on 00B version | SDIO_D2, SDIO_CLK, SDIO_CMD, SDIO_D0, SDIO_D3, SDIO_D1 are not supported on the 00B version |
| Reserved | Pin 59 Reserved must be left unconnected |
| Grounds | All GND pins must be connected to ground |
| RF | ANT is 50 Ω nominal, ANT_GNSS is 50 Ω nominal |
Table
| Area | Verdict |
|---|---|
| Datasheet property | Present |
| Pin count | Matches at 96 |
| Footprint mechanical style | Appears broadly consistent with datasheet dimensions and 96-pad architecture |
| Symbol pin mapping | Major mismatch |
| Symbol naming vs datasheet | Major mismatch |
| Manufacturing risk | Critical |
Table
| Pin number | Datasheet function | Current project symbol |
|---|---|---|
| 2 | VCC | RSVD |
| 3 | VCC | GND_2 |
| 4 | GND | V_INT |
| 5 | V_INT | GND_3 |
| 8 | RI | DCD |
| 9 | DCD | DTR |
| 10 | DTR | RTS |
| 11 | RTS | CTS |
| 12 | CTS | TXD |
| 13 | TXD | RXD |
| 14 | RXD | GND_4 |
| 15 | GND | PWR_ON |
| 16 | PWR_ON | GPIO1 |
| 17 | GPIO1 | VUSB_DET |
| 18 | VUSB_DET | RESET_N |
| 19 | RESET_N | GND_19 |
| 22 | ADC | GND_22 |
| 23 | SCL | GND_23 |
| 24 | SDA | GND_24 |
| 25 | GPIO2 | GND_25 |
| 26 | GPIO3 | GND_26 |
| 27 | GND | SCL |
| 52 | VCC | VCC_2 |
| 53 | VCC | VCC_3 |
| 55 | ANT | GND_13 |
| 56 | GND | ANT |
| 57 | ANT_DET | GND_14 |
| 59 | Reserved | GND_16 |
Table
| Risk | Why it matters |
|---|---|
| Wrong power pins | VCC and GND are misassigned near the start of the symbol, which can create direct miswiring of supply rails |
| Wrong control pins | PWR_ON, RESET_N, and VUSB_DET appear offset |
| Wrong RF pins | ANT and ANT_DET do not align to datasheet numbering |
| Reserved-pin violation | Datasheet says pin 59 must be reserved / left open, but the symbol maps that region as ground-related |
| Schematic-to-footprint mismatch hazard | Even if pad count is right, wrong pin numbers mean the PCB will route the wrong nets to the correct physical pads |
| Board failure risk | High likelihood of non-booting module, damaged part, RF failure, or impossible bring-up |
Table
| Item | Assessment |
|---|---|
| Pad count | 96, consistent with datasheet |
| Package outline | Appears consistent with 26 mm x 16 mm class module |
| Edge pad geometry | Appears consistent with 0.8 mm x 1.5 mm pads |
| Central pad geometry | Appears consistent with 1.1 mm x 1.1 mm central pads |
| Pin 1 marker | Present in footprint asset |
| Final verdict | Footprint looks plausible mechanically, but cannot be trusted in use until symbol pin numbering is corrected |
Table
| Category | Status |
|---|---|
| Datasheet availability | Good |
| Metadata completeness | Good enough for review |
| Symbol correctness | Fail |
| Footprint mechanical plausibility | Probably OK |
| Overall manufacturing readiness | Not safe |