Part Review and Datasheet Verification
Worked for 47 sec
Completed the part review and saved the detailed findings in Part Review: S-8261ABJMD-G3JT2G.
Open items:
- Datasheet URL was already set, so I did not change it; the official ABLIC URL is noted in the report.
- Pin mapping matches the datasheet, but pin descriptions/types are missing or generic.
- Footprint appears consistent with SOT-23-6, but exact pad dimensions were not exposed for full dimensional verification.
Suggested next steps:
- Update terminal pin descriptions and pin types from the datasheet.
- Optionally replace the uploaded Datasheet URL with ABLIC’s official PDF URL.
- Verify the SOT-23-6 footprint dimensions manually against ABLIC’s land pattern if manufacturing accuracy is critical.
Fix the terminal pin descriptions and pin types using the datasheet.
Thought for 5 sec
I’ll update the six terminal properties with the datasheet pin descriptions and appropriate pin types, then re-read the schematic to verify the changes.
Worked for 30 sec
Updated and verified all six terminal pin descriptions and pin types from the ABLIC S-8261 datasheet.
Open items:
- None.
Suggested next steps:
- Optionally update the Datasheet URL to the official ABLIC PDF for clearer traceability.
- Re-run a part review if you want the report document refreshed with these fixes.
Update URL and review
Update datasheet URL
Refresh review report
Check footprint dimensions
Run ERC DRC
Name
Pin #
Type
Part Type
Pin Description
Terminal Order
DO
1
Output
Terminal
FET gate control pin for discharge (CMOS output)
VM
2
Input
Terminal
Voltage detection pin between VM and VSS (overcurrent detection pin)
CO
3
Output
Terminal
FET gate control pin for charge (CMOS output)
DP
4
Input
Terminal
Test pin for delay time measurement
VDD
5
Power In
Terminal
Positive power supply input pin
VSS
6
Ground
Terminal
Negative power supply input pin
S-8261ABJMD-G3JT2G
