Part Review and Datasheet Verification

flux

Completed the part review and saved the detailed findings in Part Review: S-8261ABJMD-G3JT2G.
Open items:
  • Datasheet URL was already set, so I did not change it; the official ABLIC URL is noted in the report.
  • Pin mapping matches the datasheet, but pin descriptions/types are missing or generic.
  • Footprint appears consistent with SOT-23-6, but exact pad dimensions were not exposed for full dimensional verification.
Suggested next steps:
  1. Update terminal pin descriptions and pin types from the datasheet.
  2. Optionally replace the uploaded Datasheet URL with ABLIC’s official PDF URL.
  3. Verify the SOT-23-6 footprint dimensions manually against ABLIC’s land pattern if manufacturing accuracy is critical.
A

adrian95

Fix the terminal pin descriptions and pin types using the datasheet.

flux

I’ll update the six terminal properties with the datasheet pin descriptions and appropriate pin types, then re-read the schematic to verify the changes.

flux

Updated and verified all six terminal pin descriptions and pin types from the ABLIC S-8261 datasheet.
Open items:
  • None.
Suggested next steps:
  1. Optionally update the Datasheet URL to the official ABLIC PDF for clearer traceability.
  2. Re-run a part review if you want the report document refreshed with these fixes.
Update URL and review
Update datasheet URL
Refresh review report
Check footprint dimensions
Run ERC DRC
Sign up to send

Files

Pins

Symbol

Layout

3D View

Name
Pin #
Type
Section
Pin Group
Orientation
Order
Sub-symbol
Pin Description
DO
1
Output
FET gate control pin for discharge (CMOS output)
VM
2
Input
Voltage detection pin between VM and VSS (overcurrent detection pin)
CO
3
Output
FET gate control pin for charge (CMOS output)
DP
4
Input
Test pin for delay time measurement
VDD
5
Power In
Positive power supply input pin
VSS
6
Ground
Negative power supply input pin

S-8261ABJMD-G3JT2G