Part Audit and Datasheet Update
Worked for 6 mins 13 sec
Completed the RPX-2.5-R audit. I updated the part metadata with the official RECOM datasheet URL, manufacturer, MPN, part type, and package summary; targeted part review checks now return clean.
Detailed findings are in RPX-2.5-R Part Audit. Key flagged item: SW pins 4/5 match the datasheet names/numbers but are typed as
Input; they should ideally be Not Connected or another non-input type because the datasheet says “do not connect.”
Fix SW pins 4 and 5 to a non-input pin type per the datasheet.
Thought for 11 sec
I’ll update only the SW terminal properties for pins 4 and 5, then verify the symbol metadata and part review checks.
Worked for 49 sec
Fixed. SW pins 4 and 5 are now set to
Pin Type: Not Connected, with pin descriptions updated to: “Switch node. Do not connect per RECOM RPX-2.5 datasheet.”I verified both terminal properties afterward, and the targeted part review checks are clean.
Run ERC/DRC
Review RPX pins
Inspect SW clearance
Document NC pins
Welcome 👋
Flux accelerates your PCB design with AI.
Create your account to start using this component and bring your ideas to life.