Part Datasheet Review and Update
Thought for 2 mins 6 sec
I reviewed the part project against the datasheet using the standard part-project datasheet-sync workflow: verify the datasheet URL first, then compare project metadata, terminal count/pin mapping, and footprint presence against the official datasheet.
Status
- Datasheet URL: already present, so no web search/update was needed
- Datasheet source used: official RECOM PDF already stored on the project
- Overall result: pin count and pin naming look good, but the part metadata and terminal properties are incomplete
Table
| Item | Datasheet value |
|---|---|
| MPN | RAC10-15DK/277 |
| Manufacturer | RECOM |
| Function | 10 W PCB-mount regulated dual-output AC/DC converter module |
| Input range | 85-305 VAC or 120-430 VDC |
| Output | ±15 VDC |
| Output current | ±340 mA |
| Efficiency | 83% typ. |
| Isolation | 4 kVAC / 1 min |
| Operating temperature | -40°C to +80°C |
| Package / style | Encapsulated PCB-mount module, 52.5 x 27.4 x 23.0 mm, 5 pins |
Table
| Property | Current project | Datasheet | Result |
|---|---|---|---|
| Manufacturer Part Number | RAC10-15DK/277 | RAC10-15DK/277 | OK |
| Manufacturer Name | RECOM Power | RECOM | Minor mismatch |
| Datasheet URL | Set to official RECOM PDF | Official PDF | OK |
| Designator Prefix | PS | Not explicit in datasheet | Reasonable |
| Part Type | Electromechanical Components | AC/DC power converter module | Mismatch |
| Package / Case Code | Missing | 5-pin encapsulated PCB module, 52.5 x 27.4 x 23.0 mm | Missing |
| Description | "Recom 10W Dual Output Encapsulated Switch Mode Power Supply, +/-340mA, +/-15V dc" | Consistent with datasheet | OK |
The datasheet defines 5 pins for the dual-output version, and the project also has 5 terminals, which matches the required exact pin-count rule for part verification.
Datasheet pinout
Table
| Pin | Datasheet function |
|---|---|
| 1 | VAC in (N) |
| 2 | VAC in (L) |
| 3 | -Vout |
| 4 | COM |
| 5 | +Vout |
Table
| Check | Result |
|---|---|
| Pin count | Match |
| Pin numbers | Match |
| Pin names / labels | Match |
| Missing pins | None found |
| Extra pins | None found |
| Pin Type property | All terminals are currently Unspecified |
| Pin Description property | Not present / not populated |
| Section / Pin Group / Orientation | Not populated |
Table
| Pin | Recommended Pin Type |
|---|---|
| VAC in (N) | Power In |
| VAC in (L) | Power In |
| -Vout | Power Out |
| COM | Ground or Power Out return depending on your library convention |
| +Vout | Power Out |
Table
| Check | Result |
|---|---|
| Pad count | 5 pads present |
| Pad naming vs pin naming | Appears consistent |
| Footprint exists | Yes |
| Full dimensional verification | Not fully verifiable from current layout data alone |
What I can confirm:
- The footprint contains 5 pads, matching the datasheet pin count.
- The pad names align with the same five pin labels used by the symbol.
What I cannot fully confirm from the currently exposed layout data:
- Exact pad-to-pad spacing
- Exact hole diameter / drill
- Exact body outline placement
- Whether the footprint fully matches the datasheet mechanical drawing dimensions
The datasheet indicates a 52.5 x 27.4 x 23.0 mm module with a 5-pin through-hole style layout and shows mechanical dimensions including Ø1.0 and multiple spacing callouts, but the current tool output does not expose enough pad geometry to numerically compare every footprint dimension. So this is partially verified, not fully dimension-verified.
Mismatches and issues flagged
Table
| Severity | Item | Notes |
|---|---|---|
| Medium | Part Type incorrect | Electromechanical Components does not match the datasheet; this is an AC/DC converter / power module |
| Low | Manufacturer name differs | Project says RECOM Power; datasheet extraction says RECOM |
| Medium | Package / case metadata missing | Should include the encapsulated PCB module style and/or dimensions |
| Medium | Pin types missing | All five terminals are Unspecified |
| Medium | Pin descriptions missing | Should be short functional descriptions |
| Low | Section / orientation metadata missing | Useful for a cleaner reusable part symbol |
Table
| Field | Suggested value |
|---|---|
| Part Type | AC/DC Converter or Power Module |
| Manufacturer Name | RECOM |
| Package or Case Code | 5-pin encapsulated PCB module, 52.5 x 27.4 x 23.0 mm |
| Description | 10 W dual-output AC/DC converter module, 85-305 VAC input, ±15 V outputs at ±340 mA |
- Good: MPN, datasheet URL, terminal count, terminal names, and pin numbers all align with the datasheet.
- Needs correction: part classification metadata, package metadata, pin types, and pin descriptions.
- Footprint: structurally plausible and consistent at a high level, but not yet dimensionally proven from the currently available layout detail.
If you want, I can now update the project metadata and terminal properties to match the datasheet.
Fix metadata and pins
Check footprint dimensions
Run project review
To get started, talk to Flux or create a New Document.
