Part Information Review and Update
Thought for 2 mins 37 sec
I reviewed the current part project against the existing Sullins datasheet URL. Because the Datasheet URL is already present, I did not do a web search or modify that property. I used a datasheet-first audit flow consistent with the part-project sync guidance, especially checking exact metadata and pin completeness against the datasheet before proposing any edits
Part information review
Table
| Field | In project | Datasheet check | Status |
|---|---|---|---|
| MPN | PPPC081LFBN-RC | Matches | OK |
| Manufacturer | Sullins | Datasheet says Sullins Electronics | OK |
| Part Type | Connectors | Correct category | OK |
| Designator Prefix | J | Appropriate for connector | OK |
| Datasheet URL | Already set | Points to Sullins PDF | OK |
| Description | CONN HDR 8POS 0.1 GOLD PCB | Datasheet describes female header, 2.54 mm contact center, straight | Needs improvement |
| Package / Case Code | Not present | Datasheet supports a package/style description like 1x8 single-row female header, 2.54 mm pitch, through-hole | Missing |
| Pin count | 8 | Datasheet indicates 8 positions | OK |
Table
| Spec | Value |
|---|---|
| Type | Female header, straight |
| Positions | 8 |
| Pitch | 2.54 mm (0.100 in) |
| Current rating | 3 A |
| Voltage rating | 250 VAC |
| Insulation resistance | 5000 MΩ min |
| Dielectric withstanding voltage | 1000 VAC |
| Contact material | Phosphor bronze |
| Recommended PCB hole | 1.02 ± 0.05 mm |
| Mating post size | 0.64 mm square posts |
Table
| Check | Finding | Status |
|---|---|---|
| Pin count | Symbol has 8 terminals | OK |
| Pin numbering | Symbol is numbered 1 to 8 | OK |
| Symbol organization | Pins are arranged in a single vertical column, top-to-bottom numeric order | OK |
| Match to datasheet numbering convention | Datasheet drawing shows contacts labeled 8 7 6 5 4 3 2 1 left-to-right in the shown mechanical view, so the symbol does not mirror the datasheet physical view directly | Minor mismatch / presentation only |
| Pin descriptions | No pin descriptions found | Missing |
| Pin type | All pins are currently Unspecified | Incomplete |
Table
| Check | Finding | Status |
|---|---|---|
| Footprint style | Current footprint is 1x8 single-row | OK |
| Pad count | 8 pads | OK |
| Pitch | 2.54 mm | OK |
| Pin span | 17.78 mm center-to-center from first to last pad | OK |
| Pad-1 marking | Pad 1 is rectangular, others circular | OK |
| Recommended drill vs project | Datasheet calls for 1.02 ± 0.05 mm hole, but the accessible layout data did not expose the actual drill size to verify directly | Not fully verifiable |
| Silkscreen / fab | Basic outline and reference/value text exist | OK |
Table
| Item | Issue | Recommendation |
|---|---|---|
| Description | Current description is generic and does not clearly say female, straight, or 2.54 mm | Update description |
| Package / Case Code | Missing | Add a package/style property |
| Pin descriptions | Missing for all pins | Add short descriptions such as Connector contact |
| Pin type | All terminals are Unspecified | For ERC usefulness, consider setting them to Passive if you want a connector-style symbol model |
| Symbol physical orientation | Symbol numbering is logically correct, but not visually aligned to the datasheet's left-right mechanical numbering view | Optional cosmetic improvement only |
8-position female through-hole header, 2.54 mm pitch, straight, 3 A, 250 VAC- No datasheet URL action was needed.
- Core metadata is mostly correct: MPN, manufacturer, connector type, designator prefix, and 8-pin count all check out.
- Footprint appears broadly correct for an 8-pin, single-row, 2.54 mm through-hole connector.
- The main issues are:
- missing package/case metadata
- missing pin descriptions
- all pin types left unspecified
- description could be made much more accurate
If you want, I can turn this into a concrete cleanup pass and update the part metadata and terminal properties.
Fix metadata and pins
Check drill size
Improve part description
To get started, talk to Flux or create a New Document.
Welcome 👋
Flux accelerates your PCB design with AI.
Create your account to start using this component and bring your ideas to life.