Pin Function Grouping
Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10.
For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.
Thought for 6 sec
I’ll assign group-level terminal orders 1–10 with Power first and Ground last, and set orientations with Power on Top, Ground on Bottom, and the other sections split across Left/Right.
Worked for 50 sec
Done — I assigned
Terminal Order across the 10 sections with Power = 1 and Ground = 10, and updated orientations with Power = Top and Ground = Bottom.Open items:
- Because there are 10 groups but only Left/Right requested for the remaining groups, I alternated them across Left and Right rather than making every group globally unique.
Suggested next steps:
- Visually review the generated symbol ordering.
- Run the part review checks before publishing.
Check and fix symbol
Run part review
Fix orientation conflicts
Verify pin metadata
Prepare for publishing
