Part Review and Datasheet Update

flux

Part review summary
I reviewed the current part project against the datasheet already linked in the project.
What I checked

Table

AreaResult
MPN presentYes
Datasheet URL presentYes
Package metadata presentYes, but coarse
Pin count in symbol100
Pad count in footprint100
Symbol vs footprint pin-count consistencyMatches
Datasheet vs package family consistencyMatches a 100-pin TQFP variant
Pin numbers populatedYes, appears complete
Pin types classifiedNo - all are Unspecified
Pin descriptions populatedNo
Section / grouping metadata populatedNo
Footprint exposed pad mismatchNo exposed pad expected or found
Current project metadata Existing properties

Table

PropertyCurrent valueAssessment
Manufacturer Part NumberPIC32MZ2048EFM100-I/PTPresent
Manufacturer NameMicrochipPresent
Part TypeIntegrated CircuitsPresent but generic
Package or Case Code100-TQFPPresent but not very specific
Designator PrefixICPresent but nonstandard for MCU library parts
Datasheet URLdatasheetarchive mirror PDFPresent, so no update was required by your rule
Datasheet-derived key specs
From the linked datasheet:

Table

SpecDatasheet value
FamilyPIC32MZ Embedded Connectivity with Floating Point Unit (EF) Family
CoreMIPS32 M-Class MPU
Max frequency252 MHz at -40 C to +85 C; 180 MHz at -40 C to +125 C
PerformanceUp to 415 DMIPS
Program flash2048 KB
Supply voltage2.1 V to 3.6 V
Temperature grades-40 C to +85 C industrial, -40 C to +125 C extended
Package100-Lead TQFP, 12 x 12 x 1 mm
USBUSB 2.0 HS OTG
Ethernet10/100 Mbps MAC with MII/RMII
CAN2 CAN modules
I2C5 modules
SPI6 SPI plus SQI
UART6 UARTs
Analog12-bit ADC, up to 48 analog inputs, 2 comparators, voltage reference features
Symbol and pin audit Good news

Table

CheckResult
Terminal count100 terminals present
Pin numbersAll appear populated
Pin naming stylePin labels appear aligned with datasheet muxed-function naming
Major package consistency100-symbol terminals and 100-footprint pads are consistent with the 100-pin TQFP datasheet package
Problems found

Table

IssueSeverityNotes
All pin types are UnspecifiedHighThis weakens ERC usefulness and part quality
No Pin Description fieldsMediumPin intent is not documented
No Section fieldsMediumMakes a large MCU symbol harder to organize
No Pin Group fieldsMediumInterface grouping is missing
No Pin Orientation fieldsMediumSymbol readability is not curated
No Sub-symbol Designator Suffix fieldsMediumFor a 100-pin MCU, lack of sub-symbol grouping makes the symbol harder to use
Datasheet URL is not an official vendor URLLowIt works, but it is a mirror, not clearly canonical
Designator Prefix is ICLowFor MCU library hygiene, U is usually a better fit
Package code is only 100-TQFPLowDatasheet is more specific: 100-Lead TQFP, 12 x 12 x 1 mm
Footprint audit

Table

CheckResult
Footprint pad count100 pads
Exposed padNone found
Datasheet expectation100-lead perimeter TQFP, no exposed pad indicated for this package
Overall assessmentFootprint appears consistent with the datasheet package class
Mismatches / gaps to flag
These are the main items I would flag:

Table

ItemCurrentDatasheet / expectedFlag
Pin TypeAll UnspecifiedShould be classified per pin functionMismatch
Pin DescriptionMissingShould have short functional descriptionsMissing
SectionMissingShould group Power, Ground, GPIO, Analog, Clock, Debug, etc.Missing
Pin GroupMissingShould group ports/interfacesMissing
Pin OrientationMissingShould be set for readable symbol useMissing
Sub-symbol groupingMissingRecommended for a 100-pin MCUMissing
Package or Case Code100-TQFPBetter as 100-Lead TQFP (12x12x1 mm) or equivalent canonical codeIncomplete
Designator PrefixICU is more standard for MCU partsIncomplete
Datasheet URLMirror URLOfficial Microchip PDF preferredAdvisory
Bottom line
The part is structurally close:
  • pin count matches the package
  • footprint pad count matches the symbol
  • package class matches the datasheet
But it is not yet a production-ready library part because the terminal metadata is largely unannotated:
  • all pin types are unspecified
  • no pin descriptions
  • no functional grouping
  • no sub-symbol organization
If you want, I can do the next pass and populate pin types, pin descriptions, sections, pin groups, orientations, and sub-symbol groupings from the datasheet, and I can also tighten the project properties to match the datasheet more closely.
Fix mismatched parts
Review power parts first
Check missing datasheets
Sign up to send

No results...

Learn to Add a Component

PIC32MZ2048EFM100-I/PT

PIC32MZ2048EFM100-I/PT thumbnail
MIPS32® M-Class PIC® 32MZ Microcontroller IC 32-Bit 200MHz 2MB (2M x 8) FLASH 100-TQFP (12x12) The PIC32MZ2048EFM100-I/PT is built around a MIPS32® M-Class core operating at up to 200 MHz, delivering high computational performance suitable for real-time control, signal processing, and communication-intensive systems. It integrates large on-chip memory, multiple communication interfaces, and rich peripheral support in a compact package. Key Features Core Architecture: 32-bit MIPS32® M-Class CPU Clock Speed: Up to 200 MHz Program Memory: 2 MB Flash RAM: 512 KB Package: 100-pin TQFP (12×12 mm), surface-mount Operating Voltage: 2.1 V to 3.6 V I/O Pins: Up to 78 programmable I/O Integrated Peripherals & Interfaces Communication Interfaces: CAN, Ethernet, USB OTG I²C, SPI, SQI, UART/USART Parallel Master Port (PMP) Analog Features: 40-channel, 12-bit ADC System Peripherals: DMA controller PWM modules Watchdog timer (WDT) Brown-out reset and power-on reset Advanced Features: Floating Point Unit (FPU) for fast math operations Hardware crypto engine (AES, SHA, etc., depending on variant) High-speed USB and Ethernet connectivity #CommonPartsLibrary #IntegratedCircuit #Microcontroller #PIC® 32MZ

Properties

PIC32MZ2048EFM100-I/PT

Microchip Technology

Integrated Circuits

datasheet.datasheetarchive.com/originals/distributors/DKDS-15/280449.pdf

IC

100-TQFP

creativecommons.org/licenses/by/4.0/

Pricing & Availability

See prices from popular manufacturers for your project.

Controls