Part Availability and Alternatives
Check the availability and lifecycle status of this part. Report on current stock levels from major distributors, pricing tiers, lifecycle status (active, NRND, obsolete), and lead times. If the part has availability concerns, suggest pin-compatible alternatives.
3:23
Thought for 5 sec
Search "What is the exact manufacturer part number, manufa...".
Read BOM.
Read schematic.
Search project.
Thought for a moment
Search project.
Thought for a moment
Search project.
Thought for a moment
Searched project — 190 results.
The current part lacks an exact MPN/manufacturer, so I treated it as a generic 0.96" 128×64 I2C SSD1306 OLED module; the best stocked, lifecycle-visible candidates are Soldered 333099 and 333100, both Active at Digi-Key and stocked at Digi-Key/Mouser. I also found some availability concerns for exact tracking because the Flux part metadata is generic, and I documented pin-compatible alternatives. Full report is in OLED Display Availability Review.
Compare 333099 and 333100 for lowest total cost at 100 units.
0:49
Thought for 11 sec
At 100 units, 333100 is the better buy only if you can accept a split/lead-time order: Mouser’s visible 50+ tier estimates $1,044.00, but only 70 are in stock, with ~4-week factory lead time for the balance. 333099 has the same Mouser 50+ unit price estimate ($1,044.00) but much lower immediate stock (12 at Mouser; Digi-Key showed 0 in the latest web result), so it is less attractive for a 100-unit buy.
Best practical choice: 333100 via Mouser for lowest visible total cost, unless immediate delivery of all 100 is required.
Find cheaper alternates
Compare BOM cost
Check interchangeability
Find full stock
Document sourcing choice
Refine this doc
Ask about this doc
OLED Display Availability Review
Scope and identification
The current Flux part project is OLED-Display-0.96 and appears to represent a 4-pin 0.96 in OLED display module with terminals:
Table
| Pin | Terminal |
|---|---|
| 1 | GND |
| 2 | VDD |
| 3 | SCK |
| 4 | SDA |
Project metadata does not include an exact manufacturer part number, manufacturer name, or datasheet URL. The 3D asset label references SSD1306_OLED_Display(128x64).step, so this review treats the part as a generic 0.96 in 128×64 I2C SSD1306 OLED display module. Because no exact MPN is set, lifecycle and distributor data cannot be tied to the current Flux part with full certainty.
Exact Flux-library match status
Flux Library search did not find exact MPN matches for:
- Soldered Electronics 333099
- Soldered Electronics 333100
- DFRobot DFR0650
Flux does have functionally compatible 0.96 in / 128×64 / I2C SSD1306-style OLED display modules, but many of those library records do not include complete distributor stock or lifecycle metadata.
Compatible Flux-library entries found:
Table
| Flux part | Notes | Link |
|---|---|---|
| OLED 128 x 64 0.96inch | 4-pin I2C SSD1306-style display module | f87d4579-e667-4490-b793-c19d5ddf50d9 |
| oled 128x64 ssd1306 i2c | SSD1306 I2C display module entry | 39e6eb03-0135-86e4-4376-922a8568d2b0 |
| OLED 128 x 64 0.96inch | 4-pin I2C SSD1306-style display module | f2902088-26a4-483b-bf1e-03507b495845 |
Distributor availability observed
Stock and pricing can change quickly; values below are from the current browse session.
Table
| Candidate MPN | Manufacturer / brand | Distributor | Distributor PN | Lifecycle / status observed | Stock observed | Lead time / incoming stock | 1-pc price observed | Notes |
|---|---|---|---|---|---|---|---|---|
| 333099 | Soldered Electronics | Digi-Key | 5032-333099-ND | Active | 68 | Not noted | $11.73 | White 0.96 in SSD1306 I2C OLED module |
| 333099 | Soldered Electronics | Mouser | 392-333099 | Lifecycle not shown in search result | 8 | 50 due May 22, 2026; 100 due Aug. 4, 2026 | $14.03 | White 0.96 in SSD1306 I2C OLED module |
| 333100 | Soldered Electronics | Digi-Key | 5032-333100-ND | Active | 82 | Not noted | $11.73 | Blue 0.96 in SSD1306 I2C OLED module |
| 333100 | Soldered Electronics | Mouser | 392-333100 | New Product | 56 | Not noted | $14.03 | Blue 0.96 in SSD1306 I2C OLED module |
| DFR0650 | DFRobot | Digi-Key | 1738-DFR0650-ND | Active | 0 | Not shown | $14.50 | 0.96 in 128×64 I2C/SPI OLED; active but unavailable at Digi-Key |
| DFR0650 | DFRobot | Mouser | 426-DFR0650 | Not shown in search result | 56 | Not noted | $14.50 | 0.96 in 128×64 I2C/SPI OLED |
| C5248080 / HS96L03W2C03 | Asian Brands HS | LCSC | C5248080 | Not shown in search result | ~4,542–4,858 | Not noted | ~$1.98 | 0.96 in 128×64 I2C OLED, but controller listed as SSD1315, not SSD1306 |
| C5248081 / HS91L02W2C01 | Asian Brands HS | LCSC | C5248081 | Not shown in search result | ~1,268–1,324 | Not noted | ~$2.01 | SSD1306 I2C, but 0.91 in 128×32, not a 0.96 in 128×64 match |
Pricing tiers observed
Only LCSC search results exposed tiered pricing in the browse result:
Table
| MPN / LCSC PN | Qty | Price |
|---|---|---|
| HS96L03W2C03 / C5248080 | 1+ | $1.9786 |
| HS96L03W2C03 / C5248080 | 10+ | $1.6248 |
| HS96L03W2C03 / C5248080 | 500+ | $1.1715 |
| HS96L03W2C03 / C5248080 | 1000+ | $1.1384 |
For Digi-Key and Mouser, only the 1-piece pricing was visible in the search summary; open the distributor pages directly before purchasing to confirm full tier breaks.
Lifecycle risk assessment
Current part project
- Risk level: Medium
- Reason: The Flux part has no exact MPN or manufacturer. Generic SSD1306 OLED modules are widely available, but a generic part cannot be lifecycle-tracked reliably.
Best low-risk branded options
- Soldered 333099: Good availability across Digi-Key and Mouser; Digi-Key shows Active.
- Soldered 333100: Good availability across Digi-Key and Mouser; Digi-Key shows Active, Mouser result shows New Product.
Availability concerns
- DFRobot DFR0650: Digi-Key shows Active but 0 stock, while Mouser has stock. This is a mild sourcing risk if Digi-Key is required.
- LCSC C5248080: Strong low-cost stock, but it is listed as SSD1315, not SSD1306. It may be firmware-compatible in many cases, but it should not be treated as an exact SSD1306 replacement without validating initialization commands and display behavior.
Pin-compatible / functionally compatible alternatives
The current part’s 4-pin header is GND, VDD, SCK/SCL, SDA. Suitable alternatives should match:
- 0.96 in class OLED module
- 128×64 resolution
- I2C interface
- 4-pin power + I2C header
- Same or adaptable pin order: GND, VCC/VDD, SCL/SCK, SDA
- Electrical compatibility with the host voltage rail
- Firmware compatibility with SSD1306 or verified SSD1315-compatible driver setup
Recommended alternatives:
Table
| Recommendation | Why |
|---|---|
| Soldered 333099 | Best white OLED candidate; Active at Digi-Key, stocked at Digi-Key and Mouser |
| Soldered 333100 | Best blue OLED candidate; Active/New Product status, stocked at Digi-Key and Mouser |
| DFRobot DFR0650 | Branded option with Mouser stock, but Digi-Key stock is currently 0 |
| LCSC C5248080 / HS96L03W2C03 | Low-cost high-stock alternative, but controller is SSD1315 rather than SSD1306, so verify firmware compatibility |
| Winstar WEA012864D-03 | 4-pin 0.96 in I2C OLED PCB module with SSD1306BZ; suitable candidate if distribution and pinout are acceptable |
| Raystar REA012864M | 0.96 in SSD1306 128×64 I2C module candidate; verify exact connector/pinout before substituting |
Recommendation
If this part will be used in a production BOM, avoid leaving it as a generic OLED module. Choose a concrete purchasable MPN and update the Flux part metadata. The strongest sourcing candidates from the current review are:
- Soldered Electronics 333099 for white OLED
- Soldered Electronics 333100 for blue OLED
Both have visible stock at Digi-Key and Mouser, and Digi-Key reports them as Active.
Sources checked
- Current Flux schematic / part terminals
- Current Flux BOM metadata
- Flux Library search
- Digi-Key search results for Soldered 333099, Soldered 333100, DFRobot DFR0650
- Mouser search results for Soldered 333099, Soldered 333100, DFRobot DFR0650
- LCSC OLED display category search results
- Soldered SSD1306 documentation search results
Welcome 👋
Flux accelerates your PCB design with AI.
Create your account to start using this component and bring your ideas to life.