Pin Grouping Datasheet
-
Make the functional group more general.
-
Add a Section property to all pins, and apply the same value used in the Pin Group property to each pin's Section property.
Assign a Terminal Order from 1 to 10, starting with Power. Power should be Terminal Order 1, and Ground should be last, Terminal Order 10. For Orientation, set Power to "Top" and Ground to "Bottom." For the remaining sections/groups, you may decide the Terminal Order and Orientation yourself. For Orientation, distribute them between "Left" and "Right" — don't put everything on one side. Each group/section should have a different orientation.
Thought for 9 sec
I’ll simplify the pin grouping, make every pin’s Section match Pin Group, and rebalance terminal order/orientation with Power at top/order 1 and Ground at bottom/order 10.
Worked for 3 mins 3 sec
Updated the pin organization to more general groups:
Power, Control, Signal, and Ground. Verified all 49 pins now have Section matching Pin Group, with Power at order 1/top, Control at order 2/right, Signal at order 3/left, and Ground at order 10/bottom.Open items:
- None.
Suggested next steps:
- Review the generated symbol visually.
- Ask me to fine-tune grouping names if you prefer
Interfaceinstead ofSignal. - Ask me to validate pin numbering against the QFN48 datasheet.
Validate and refine symbol
Validate pin numbering
Review symbol layout
Use Interface naming
Check ERC
