Part Datasheet Review and Validation
Thought for 7 sec
I’ll inspect the part metadata, look for an official datasheet if needed, update the Datasheet property if missing, then cross-check symbol, footprint, and pin descriptions against the datasheet.
Thought for 31 sec
The part already has a Datasheet URL set, so I’ll use that official product page as the reference and won’t overwrite it.
Worked for 5 mins 9 sec
Review complete. The Datasheet URL was already set to the official FlyTo product page, so I did not overwrite it; I documented the full metadata/spec/pinout/footprint cross-check in MM238RW Part Review.
Open items:
- The current symbol mostly matches the official English page pin table, but conflicts heavily with a newer/search-discovered MM238RW PDF/Chinese listing pinout.
- Pin 7 label
6.5M, SPI pin descriptions, pin types, and the supply-pin direction need cleanup once the intended module revision is confirmed. - Footprint outline matches 28 × 23 mm, but a newer source lists 28.4 × 23 mm.
Suggested next steps:
- Confirm which MM238RW revision/source should be authoritative.
- Update symbol pin descriptions and pin types.
- If using the newer PDF pinout, remap the symbol/footprint pins before release.
Use English source
Use newer PDF
Compare revisions
Fix current issues
Run part review
