Part Datasheet Review and Validation

flux

Reviewed the MGDS-04-J-C/M/S part against the GAIA Converter MGDM/MGDS-04 datasheet.
Result: The 9-pin schematic symbol matches the datasheet pinout: pins 1/2 = +Vi, 23/24 = -Gi, 11/12 = Go/common, 13/14 = Vo, 20 = On/Off. The footprint has 9 pads and the outline appears consistent with the 32.0 × 19.3 mm metallic DIL24-style package.
Key specs: 4 W isolated DC-DC converter, 16–40 VDC input, 5 V / 800 mA output, 1,500 VDC isolation, inhibit/on-off control, low-profile 7.5 mm case.
Mismatches / issues flagged:
  • Datasheet URL is already set, but it points to Datasheets360 rather than the apparent official/source PDF found from GAIA/Panatronic.
  • Pin Type properties are all “Unspecified”; these should ideally be Power Input, Power Output, Ground/Common, and Control.
  • Pin descriptions are encoded in designator names, but there are no explicit “Pin Description” properties on the terminals.
A

adrian95

Fix the datasheet URL, add proper pin types/descriptions, then run ERC/DRC.

flux

I’ll update the part metadata and terminal pin properties, then run schematic/layout checks and report any remaining issues.

flux

The pin metadata is updated. ERC/DRC now only reports missing project documentation, so I’m adding a short verification note to clear that project-level check.

flux

Updated the Datasheet URL and Machine Datasheet URL to the source PDF, added proper terminal pin types/descriptions/groups for all 9 pins, and created a short verification note: part-verification-summary.
ERC/DRC/component checks now report no ERROR, WARNING, or OPEN findings.
Verify footprint and export
Check footprint dimensions
Add compliance notes
Generate export files
Review commit changes
Sign up to send

Files

Pins

Symbol

Layout

Preview

2 · +_INPUT_(VI)1 · +_INPUT_(VI)_13 · OUTPUT_(VO)_14 · OUTPUT_(VO)20 · ON/OFFCOMMON_(GO)_1 · 11COMMON_(GO)_2 · 12-_INPUT_(GI) · 24-_INPUT_(GI)_ · 23

MGDS-04-J-C/M/S