Part Information Review and Update
Worked for 56 sec
Grouped the MCP4922T-E/SL pins by primary datasheet function, with each physical pin assigned to exactly one group.
Groups applied:
- Power: VDD, VSS
- SPI: ~CS, SCK, SDI
- Control: ~LDAC, ~SHDN
- Reference: VREFA, VREFB
- DAC outputs: VOUTA, VOUTB
- No Connect: NC, NC_2, NC_3
I also updated pin types and datasheet-based pin descriptions for each terminal.
-
Make the functional group more general.
-
Add a Section property to all pins, and apply the same value used in the Pin Group property to each pin's Section property.
Thought for 7 sec
I’ll simplify the pin group names to broader functional categories and mirror each Pin Group value into Section for every pin.
Worked for 33 sec
Done. I updated all pins so each has a more general functional
Pin Group, and every Section now exactly matches its Pin Group.Applied groups:
Power: VDDGround: VSSDigital: ~CS, SCK, SDI, ~LDAC, ~SHDNAnalog: VREFA, VREFB, VOUTA, VOUTBMISC: NC, NC_2, NC_3
Fix metadata and review
Fix package metadata
Verify datasheet URL
Run final review
Update review document
Refine this doc
Ask about this doc
MCP4922T-E/SL Part Review
Reviewed part information
- Manufacturer: Microchip
- Manufacturer Part Number: MCP4922T-E/SL
- Description in project: Digital to Analog Converters - DAC Dual 12-bit SPI int
- Published Part UID: 57fb930a-2999-43c4-846f-e851ddf19741
- Pads / terminals: 14
- Project Datasheet URL currently set: uploaded PDF URL
- Official Microchip datasheet found: https://ww1.microchip.com/downloads/en/DeviceDoc/22250A.pdf
Datasheet identity
Official datasheet: Microchip MCP4902/4912/4922, document DS22250A. MCP4922T-E/SL decodes as MCP4922 dual 12-bit voltage-output DAC, tape-and-reel, extended temperature, 14-lead narrow SOIC (SL).
Key specifications
- Function: dual 12-bit voltage-output DAC with SPI interface
- Supply voltage: 2.7 V to 5.5 V single supply
- Temperature range for E grade: -40 °C to +125 °C
- Serial interface: SPI-compatible, up to 20 MHz SCK
- Output: rail-to-rail output amplifiers, typical settling time 4.5 µs
- Reference inputs: external VREFA and VREFB, range VSS to VDD in unbuffered mode
- Gain: selectable 1x or 2x by command bit
- Typical operating current: 350 µA at 5 V, 250 µA at 3 V; shutdown current 0.3 µA typical
- Package: 14-lead plastic small outline, narrow SOIC, 3.90 mm body, 1.27 mm pitch
- Recommended bypass: 0.1 µF ceramic from VDD to VSS; datasheet also recommends optional 10 µF bulk capacitor
Datasheet pinout vs schematic symbol
Table
| Pin | Datasheet symbol | Datasheet function | Project terminal | Result |
|---|---|---|---|---|
| 1 | VDD | Supply voltage input | VDD | Match |
| 2 | NC | No connection | NC | Match |
| 3 | CS | Chip select input, active low | ~CS | Match; active-low notation is appropriate |
| 4 | SCK | Serial clock input | SCK | Match |
| 5 | SDI | Serial data input | SDI | Match |
| 6 | NC | No connection | NC_2 | Match |
| 7 | NC | No connection | NC_3 | Match |
| 8 | LDAC | DAC latch / synchronization input, active low usage | ~LDAC | Match; active-low notation is appropriate |
| 9 | SHDN | Hardware shutdown input, low = shutdown | ~SHDN | Match; active-low notation is appropriate |
| 10 | VOUTB | DAC B output | VOUTB | Match |
| 11 | VREFB | DAC B reference input | VREFB | Match |
| 12 | VSS | Ground reference | VSS | Match |
| 13 | VREFA | DAC A reference input | VREFA | Match |
| 14 | VOUTA | DAC A output | VOUTA | Match |
Footprint review
The project has 14 PCB pads and a default footprint outline consistent with a 14-lead SOIC narrow package. The visible outline corresponds to approximately 3.9 mm body width and 8.65 mm body length, which matches Microchip SL 14-lead SOIC dimensions. The project property currently says
Package or Case Code: TO, which does not match the datasheet and should be corrected to SOIC-14 / SL narrow SOIC.Mismatches / issues flagged
- Package property mismatch: project shows
Package or Case Code: TO; datasheet saysSL = 14-Lead Plastic Small Outline - Narrow (SOIC). This should be corrected. - Datasheet property source: a datasheet URL exists, but it points to an uploaded PDF rather than Microchip's official PDF URL. Since the user instruction only required updating if no datasheet URL was set, I did not change the part-level property. Recommended official URL: https://ww1.microchip.com/downloads/en/DeviceDoc/22250A.pdf
- Pin electrical types are all
Unspecifiedon the terminals. Functionally the pin numbers/names match, but better metadata would set VDD as Power In, VSS as Ground, VOUTA/VOUTB as Output, VREFA/VREFB and digital control/SPI pins as Input, and NC pins as Not Connected. - Pin descriptions are not populated beyond terminal names. Adding datasheet-derived pin descriptions would improve library quality.
Overall result
Symbol pin numbering and names match the official datasheet. Footprint pad count and outline appear consistent with the required 14-lead narrow SOIC package. Main corrections recommended are metadata-level: package property should not be TO, and pin types/descriptions should be enriched.
Reviewed part information
Datasheet identity
Key specifications
Datasheet pinout vs schematic symbol
Footprint review
Mismatches / issues flagged
Overall result
