KiCad Bileşen İndirimi

denizers

denizers

brave_screenshot_easyeda.com (2).png

Image

brave_screenshot_easyeda.com.png

Image

flux

Şu anda işlem yapamıyorum çünkü bu oturumda yürütme/kredi kapasitesi bitmiş durumda; araç kullanarak seçili bileşeni inceleyemem veya dosya oluşturup indirme bağlantısı hazırlayamam.
KiCad için genelde gereken dosyalar şunlardır:
  • Sembol: .kicad_sym
  • Footprint: .kicad_mod
  • 3D model varsa: .step / .wrl
  • Tam proje aktarımı için: KiCad proje dosyaları veya netlist/PCB export
Ekran görüntülerindeki kartlar EasyEDA/JLCPCB tarzı bir tasarıma benziyor. Eğer amacın bu bileşeni veya kartı KiCad’e taşımaksa, yapılacak işler şunlar:
  1. Seçili bileşenin MPN / parça adı / footprint ölçüsü belirlenir.
  2. KiCad sembol ve footprint karşılığı bulunur veya elle oluşturulur.
  3. Pad numaraları, pin isimleri ve mekanik ölçüler doğrulanır.
  4. .kicad_sym ve .kicad_mod dosyaları hazırlanır.
  5. Gerekirse tüm kart KiCad’de yeniden çizilir veya EasyEDA’dan KiCad formatına dönüştürülür.
Bu oturumda daha önce proje üzerinde herhangi bir dosya üretimi veya indirme işlemi tamamlanmadı. Devam edebilmek için sonraki oturumda seçili bileşenin adını/MPN’sini ya da EasyEDA/Flux bileşen linkini paylaşman yeterli.
Dönüştürme adımları
Bileşen listesi çıkar
Footprint önerileri
Şematik bağlantılar
why does the schematic has like 2 parts?
cruzzo

cruzzo

@copilot why does the schematic has like 2 parts?
2y

copilot

Based on the information you provided, two parts could refer to the two ICs or components in your schematic: The MAX485 TTL to RS-485 Interface Module (designated as IC1) and the LED (designated as LED1).
The MAX485 TTL to RS-485 Interface Module (IC1) is used as the main IC in this design. It's a low power transceiver for RS-485 communication. This IC allows Microcontrollers like the Arduino to use the RS-485 differential signaling for robust long distance serial communications.
The LED1 component is a light-emitting diode typically used to indicate status or provide visible feedback to the user. It's often used in its simple diode model as a stand-in for many real-world components such as indicators.
This setup is very common in RS-485 communication where the MAX485 IC is used for data transfer and the LED is used as a status indicator.
If you meant different parts, could you clarify it a bit further?
2y
Someone is typing...
2
New Comment
Someone is typing...
4
please explain what C2, R8, C1, LED1, VCC do.
cruzzo

cruzzo

@copilot please explain what C2, R8, C1, LED1, VCC do.
2y

copilot

Certainly, here are the functions of the components you mentioned:
  1. C2: This is a capacitor with capacitance value of 1u (1 microfarad). In the context of a MAX485 interface module, it's likely being used in a decoupling role. It helps to smooth out electrical noise on the power signals by absorbing rapid fluctuations in voltage.
  2. R8: This is a resistor with a resistance value of 1K ohms. The resistor serves to limit the current flowing through the circuit. It's often used in circuits for purposes such as setting operating conditions, forming voltage dividers, or protecting elements from excessive current.
  3. C1: This is a capacitor with capacitance value of 10u (10 microfarads). Similar to C2, this capacitor might be used for decoupling and noise filtering, but with its larger value it's more suitable to filter out lower frequency noise.
  4. LED1: This is a Light Emitting Diode. It emits light when current flows through it. In an interface board like this, LEDs are typically used as indicators to show the status of certain signals or power.
  5. VCC: VCC represents the power supply voltage for the circuit. It might derive from an external power supply, or might be generated on board using a power management IC or similar. It powers up the circuitry, providing the voltage needed for components to operate.
Please note: The specific role of each component might slightly vary depending on its connections in the schematic. This is a high-level understanding based on standard usages of these components.
2y
Someone is typing...
3
R1
Resistance
10KΩ
C2
Capacitance
1uF
R8
Resistance
1KΩ
R2
Resistance
10KΩ
R3
Resistance
10KΩ
R5
Resistance
20KΩ
C1
Capacitance
10uF
R7
Resistance
120 Ω
R4
Resistance
10KΩ
R6
Resistance
20KΩ
DI
VCC
RO
J3
GND
VCC
J2
DE
VCC
IC1
RE
VCC
VCC
A
LED1
VCC
J1
B

No files yet

Documents

    Documents are markdown text files which describe project goals, capture details, or even simulation outputs.

    Assets

    No assets added.

    MAX485 Module

    MAX485 Module thumbnail
    The MAX485 TTL to RS-485 Interface Module allows MCUs to use the RS-485 differential signaling for robust long distance serial communications.

    Properties

    Module

    U

    Pricing & Availability

    Distributor

    Qty 1

    Digi-Key

    $7.43

    LCSC

    $0.96

    Mouser

    $7.37

    Controls