Pin Grouping by Function

flux

Grouped all 20 pins by function and set each pin’s Section equal to its Pin Group:
  • Ethernet/PHY Pairs
  • PoE/Center Taps
  • Cable/MDI Center Taps
  • LEDs
  • Shield/Chassis
All pin numbers, names, electrical types, footprint mappings, and geometry were preserved. This part has no documented 3V3 or GND terminals.
A

adrian95

can you fix this flag issue, LPJG0926HENL Flux symbol appears to label pins 4 and 5 as TD2-1 / TD2-2, but the manufacturer datasheet/schematic indicates these are CT pins, not extra TD2- data pins. This creates high risk of miswiring Ethernet pair 2.

flux

Confirmed: pins 4 and 5 are currently mislabeled TD2-_1 and TD2-_2, despite being grouped as center taps. I’ll verify the manufacturer pin names, rename both CT terminals correctly, and preserve their pin numbers, footprint mapping, groups, and symbol positions. This edit requires Agent mode; click the button to continue.
Continue in Agent Mode

flux

I’ll verify the manufacturer pinout, correct pins 4 and 5, then re-check the symbol mapping.

flux

Fixed the symbol labeling:
  • Pin 4: TD2-_1 → CT4
  • Pin 5: TD2-_2 → CT5
Pin numbers, symbol positions, footprint mappings, and PoE/Center Taps grouping were preserved.
Sign up to send

Files

Pins

Symbol

Layout

3D View

LPJG0926HENL