Part Datasheet Review and Validation

adrian95

adrian95

Review all available part information (MPN, package, pin count, description, properties). If no datasheet URL is already set, search the web for the official datasheet and update the part's Datasheet property with the URL. Then cross-check the schematic symbol, footprint, and pin descriptions against the datasheet. Summarize key specs and flag any mismatches.

flux

I’m blocked from executing the requested review because the session has no remaining execution credits, so I cannot inspect or modify the project, search for datasheets, or update properties.
What remains to be done:
  • Inspect the part metadata: MPN, package, pin count, description, and existing properties.
  • Check whether the Datasheet property is populated.
  • If missing, locate the official manufacturer datasheet for PLM66100QDCKRQ1 and update the Datasheet URL.
  • Cross-check the schematic symbol pinout, footprint pad mapping, and pin descriptions against the datasheet.
  • Summarize key electrical/package specs and flag any mismatches.
Based on the project context only, the part appears to be PLM66100QDCKRQ1 in a Texas Instruments SC70-6 / DCK 6-pin package, but this still needs datasheet-backed verification before it should be trusted.
Rerun after credits
Prioritize inspection
Manual checklist
Expected pins
Sign up to send

To get started, talk to Flux or create a New Document.

Documents

    Documents are markdown text files which describe project goals, capture details, or even simulation outputs.

    Assets

    PLM66100QDCKRQ1

    PLM66100QDCKRQ1

    PLM66100QDCKRQ1 PLM66100QDCKRQ1_0_1 Symbol.svgDefault
    LM66100-Q1-thumb.png

    LM66100-Q1-thumb.png

    LM66100-Q1-thumbThumbnail
    kicad_mod

    PLM66100QDCKRQ1

    SC70-6_DCK_TEX-M.kicad_modFootprint
    stp

    PLM66100QDCKRQ1

    DCK0006A.stp3D Model

    LM66100-Q1

    LM66100-Q1 thumbnail
    Automotive 1.5-V to 5.5-V, 1.5-A, 0.5-µA IQ ideal diode with integrated FET
    The LM66100-Q1 is a Single-Input, Single-Output (SISO) integrated ideal diode that is well suited for a variety of applications. The device contains a Pchannel MOSFET that can operate over an input voltage range of 1.5 V to 5.5 V and can support a maximum continuous current of 1.5 A. The chip enable works by comparing the CE pin voltage to the input voltage. When the CE pin voltage is higher than VIN, the device disables and the MOSFET is off. When the CE pin voltage is lower, the MOSFET is on. The LM66100-Q1 also comes with reverse polarity protection (RPP) that can protect the device from a miswired input, such as a reversed battery. Two LM66100-Q1 devices can be used in an ORing configuration similar to a dual diode ORing implementation. In this configuration, the devices pass the highest input voltage to the output while blocking reverse current flow into the input supplies. These devices can compare input and output voltages to make sure that reverse current is blocked through an internal voltage comparator. The LM66100-Q1 is available in a standard SC-70 package characterized for operation over a junction temperature range of –40°C to 150°C.
    1 Features • AEC-Q100 qualified for automotive applications: – Device temperature grade 1: –40°C to 125°C ambient operating temperature range • Wide operating voltage range: 1.5 V–5.5 V • Reverse voltage standoff on VIN: –6-V absolute maximum • Maximum continuous current (IMAX): 1.5 A • On-Resistance (RON): – 5-V VIN = 79 mΩ (typical) – 3.6-V VIN = 91 mΩ (typical) – 1.8-V VIN = 141 mΩ (typical) • Comparator chip enable (CE) • Channel status indication (ST) • Low current consumption: – 3.6-V VIN shutdown current (ISD,VIN): 120 nA (typical) – 3.6-V VIN quiescent current (IQ, VIN): 150 nA (typical)

    Properties

    LM66100-Q1

    Texas Instruments

    Power Management

    ti.com/lit/gpn/lm66100-q1

    U

    creativecommons.org/licenses/by/4.0/

    parametric-v1

    Pricing & Availability

    See prices from popular manufacturers for your project.

    Controls