Part Review and Datasheet Update
Thought for 1 min 31 sec
I reviewed the part project against the TI datasheet and the current project metadata. Since a
Overall result
Datasheet URL is already present and it points to the official TI PDF, no web search or property update was needed. Per the part-sync workflow, the datasheet should be the source of truth and the pin count should match exactly- Datasheet URL: already set to the official TI datasheet
- Pin count: 8 pins in project, 8 pins in datasheet
- Pin names/numbers: match the datasheet
- Main issues found: project metadata is incomplete/inaccurate, and per-pin properties are underdefined
Table
| Field | In project | Datasheet / expected | Status |
|---|---|---|---|
| Manufacturer Part Number | LM2005DR | LM2005DR | OK |
| Manufacturer Name | TEXAS | Texas Instruments Incorporated | Mismatch |
| Part Type | Diodes | Half-bridge gate driver / gate driver IC | Mismatch |
| Description | 107-V, 0.5-A/0.8-A half-bridge gate driver with 8-V UVLO and integrated bootstrap diode | Consistent with datasheet | OK |
| Datasheet URL | Official TI PDF present | Official TI PDF | OK |
| Designator Prefix | IC | Typically U for ICs | Mismatch |
| Package / Case Code | Not present in shown project properties | D (SOIC-8), body 4.90 mm × 3.91 mm | Missing |
| Pin Count | 8 | 8 | OK |
Table
| Item | Value |
|---|---|
| Function | High-voltage half-bridge gate driver |
| Max bus capability | 107 V |
| Peak source current | 0.5 A |
| Peak sink current | 0.8 A |
| GVDD operating range | 9 V to 18 V |
| UVLO | GVDD rising 8.15 V typ, falling 6.75 V typ |
| Bootstrap UVLO | rising 7.6 V typ, falling 6.25 V typ |
| Package | SOIC-8 (D) |
| Temp range | -40°C to 125°C |
| Special feature | Integrated bootstrap diode |
Table
Manufacturer Nameshould be Texas Instruments rather than TEXASPart Typeis incorrect; Diodes should be replaced with a driver category such as Gate Driver / Half-Bridge DriverDesignator Prefixshould be U, not ICPackage or Case Codeis missing; datasheet indicates D (SOIC-8)
- Symbol pin names and numbers are correct
- All eight terminals currently have
Pin Type = Unspecified, which is a mismatch versus the datasheet-derived types - No
Pin Descriptionproperties are present; those should be added as short functional labels
- The project has a footprint with 8 pads, and pad names correspond to the 8 datasheet pins
- That is consistent with the SOIC-8 package pin count
- I did not see explicit footprint package metadata in the exposed project data, so I can confirm 8-pad consistency, but not fully verify courtyard/body/pad dimensions against the TI package drawing from the current inspection alone
Table
| Priority | Fix |
|---|---|
| High | Change Part Type from Diodes to Gate Driver / Half-Bridge Driver |
| High | Set proper Pin Type on all 8 terminals |
| High | Add short Pin Description properties for all pins |
| Medium | Change Manufacturer Name to Texas Instruments |
| Medium | Change Designator Prefix to U |
| Medium | Add Package or Case Code = D (SOIC-8) |
| Optional | Add project properties like Operating Temperature = -40°C to 125°C and implementation notes about local decoupling and bootstrap capacitor placement |
- Good news: the description, datasheet URL, pin count, pin names, and pin numbering are all consistent with the TI datasheet.
- Problems: the project is still underspecified as a reusable part because the metadata classification is wrong and the pins lack proper type/description fields.
If you want, I can next turn this into a precise fix list for the part properties and terminal properties.
Fix metadata and pins
Check footprint dimensions
Create property checklist
