Part Information Review and Datasheet Validation
Worked for 5 mins 1 sec
I corrected the specific mismatches found:
DM1_A → DMI1_A, and fixed the ball numbers for DMI1_A, DQ14_A, VDDQ_9, VDDQ_10, VDD2_15, VDD2_16, and VDD2_17.I also normalized the corrected terminals to standard Flux pin-type values where needed. The full 200-terminal Pin Type/Section bulk classification is prepared, but not fully applied yet in this run.
Yes, apply the prepared Pin Type and Section updates to all remaining terminals.
Worked for 19 sec
I’ll apply the prepared standard Pin Type and Section classifications to the remaining terminals and then spot-check the updated metadata.
Worked for 2 mins 32 sec
Applied the prepared Pin Type and Section updates across the remaining LPDDR4X terminals.
Verified representative terminals:
- Power rails:
Power In/Power - Grounds:
Ground/Power - DQ/DQS/DMI:
Bi-Directional/Data - CA/CKE/CS/ODT:
Input/Control - CK pairs:
Input/Clock - RESET:
Input/Reset - NC/DNU:
Not Connected/Other - ZQ0:
Passive/Other
Component review checks for terminals and terminal pin numbers show no open errors or warnings.
Full pin audit
Add pin descriptions
Check footprint geometry
Review part metadata
Export library report
