Part Review and Datasheet Verification
Worked for 3 mins 8 sec
Completed the FGDS-2A-50V part review and saved the detailed findings in
fgds-2a-50v-part-review. The pin numbers/names and 5-pad footprint count match the GAIA datasheet; flagged issues are missing pin descriptions/unspecified pin types, a non-official uploaded Datasheet URL, and incomplete visibility into pad drill/coordinate geometry.Open items:
- Decide whether to replace the existing Datasheet URL with the official GAIA PDF.
- Verify footprint pad drill/spacing against the datasheet mechanical drawing before release.
Suggested next steps:
- Update terminal pin descriptions/types from the datasheet.
- Switch Datasheet URL to the official GAIA URL.
- Perform a footprint geometry audit against the datasheet bottom-view drawing.
Set the terminal pin descriptions and appropriate pin types from the datasheet.
Thought for 6 sec
I’ll update each of the five terminals with the datasheet function and a more appropriate electrical pin type, then re-read the schematic to verify.
Worked for 31 sec
Updated and verified all five terminal descriptions and pin types from the datasheet.
Open items:
- None.
Suggested next steps:
- Replace the existing uploaded datasheet URL with the official GAIA URL if desired.
- Audit footprint drill/spacing against the datasheet mechanical drawing.
Update URL and audit
Use official datasheet
Audit footprint geometry
Run part review
Document changes
